Datavideo RMC-90 manual Do not give power to the pins

Connect to Datavideo TLM-404 4”x4 TFT LCD or connecting an certain adaptor cable to control the Tally interface of video input source devices, such as Came

The D-Sub 15-pin connector works by closing contacts between a ground pin and the corresponding LED pin as following pin out table.

*. Do not give power to the pins.

Video

Channel

A

B

C

D

RED LED	GREEN	AMBER LED
(On Air - Live)	LED	(Next - Cued)
	(OffLine - Safe)
Pin 1	Pin 2	Pin 3
Pin 6	Pin 7	Pin 8
Pin 11	Pin 12	Pin 13
Pin 5	Pin 10	Pin 15

Connect to SE-800 Remote RS-232 interface

Pin 2: RX, Pin 3: TX

Pin 5: Ground

Others: Not connected

DC 14.4 --- 15V input from SE-800 Power adaptor

Pin 1: Ground

Pin 4: VCC

DC 12V 0.5A output to connect to external 12V DC powered peripherals

DC 14.4 --- 15V output to SE-800 Power input Pin 1: Ground

Pin 4: VCC

11