Datavideo RMC-90 manual

T-bar is for performing effect transitions manually. It can be either all the way up, all the way down, or anywhere in between. To enable SE-800 T-Bar, the T-Bar on RMC-90 need to be set at either end of its travel.

PLEASE NOTE, T-Bar on RMC-90 CAN NOT CONTROL AN AUDIO ONLY FADE EFFECT, it controls only Video or Video with embedded audio effect.

Press to turn on LED to enable the GPI Trigger input control on SE-800

Turn on LED to enable the T-Bar effect control for video

Press on the button to Auto-Play the effect

Each press on this button will playback the pre-stored function key’s effect sequentially

Turn on LED to enable the T-Bar Audio effect control.

Note: Push down the T-Bar to mute Audio

9