Daewoo DLP-20J1, DLP-20W2, DLP-20D7 instruction manual Features Menu, Wake up function

Features Menu

See section near the end of section DAILY USE for a more detailed explanation of these functions. (For operating instructions see page 20, HOW TO USE THE SUB-MENUS)

1. Adjust this value ON or OFF.

GB

1.When switched to ON:

Prevents the use of the TV set with- out remote control

2.Wake up function

This function is only selectable when the clock is set. The TV set turns on from stand-by at the WAKE TIME with the programme entered on the WAKE PROG. line. Put the TV set on stand-by with the remote control.

3.Shared with WAKE TIME.

4.TV clock setting

This function allows user to enter the time manually.

Note : If you turn off the set with the main power button, the clock setting is lost. An automatic attempt is made to set the clock again at power on.

5.This function is only selectable when the default picture format is currently active (see also FORMAT SELECTION, AUTO setting, page 19). This selects the default format to be used only when the format selected with the ZOOM button (A15) is AUTO, and no picture format signalling data is received.

FEATURES

CHILD LOCK	OFF
WAKE TIME	OFF
WAKE PROG.	01
CLOCK	- - : - -
CLOCK PROG.	01
ZOOM AUTO	FULL SCREEN
LANGUAGE	GB
Position	ON/OFF
Previous

- In stand-by mode, the stand-by

indicator flashes red and green to

indicate the CHILD LOCK is set.

- The front panel TV buttons (B2, B3,

B4) become inactive and the TV will

only respond to the remote control.

2. Switch the WAKE UP function OFF

or ’ON’ (the time will be shown

e.g. 07:15) with the remote control

CURSOR LEFT (A7) /RIGHT (A20)

buttons

- Enter the wake up time with the

remote control 0...9 NUMBER

(A3) buttons.

3. Adjust TV turn-on program number.

4. Adjust TV clock. Clock will start

at 0 seconds upon entry of the

4th figure.

The prog. no. which can be used

to automatically seize the time at

turn on can be entered here.

5. Choose your preferred default

format with the remote control

CURSOR LEFT (A7) /RIGHT (A20)

buttons.

Note : For 4:3 TVs FULL SCREEN is

represented by 4:3. For 16:9

TVs FULL SCREEN is repre-

sented by 16:9.

6. The currently selected LANGUAGE

is displayed. Press the OK button

6. LANGUAGE menu entry.

(A18) to access the menu and

change the selection.

Language Menu

- Select the preferred LANGUAGE by use of the CUR- SOR LEFT (A7), RIGHT (A20) buttons, and the CURSOR UP (A6) or DOWN (A21) buttons.

-Press the OK button (A18) to confirm the selection (the choice will be highlighted in red).

Note: The languages shown are subject to modifica- tion without prior notice.

LANGUAGE

BG	CZ	D	DK	E
F	FIN	GB	GR	H
I	N	NL	P	PL
RO	RUS	S
	Position		Position
	Previous		Confirm

25