2: Cross Tube Installation
[25]
Slide the cross tubes [02] into the first monitor bracket [G], through the arm assembly [H] and then through the second monitor bracket [J]. Center the cross tubes on the back of the TV. Using the Allen Key, tighten the six vise assemblies until the cross tubes no longer rotate.
Attach the TV and arm assembly to the wall plate according to the instructions provided with the VMDD26 Full Motion Mount.
HEAVY! You will need assistance with this step.
NOTE
If you no longer have your VMDD26 Installation Manual, download one from www.Sanus.com or call Sanus Systems Customer Service.
[02]
[J]
[G] 
[02]
[H]
3: Install Extension Tubes
[02]
Slide the four extension tubes [03] (felt end first) into the cross tubes [02].
[03]
[03] | [03] |
|
[03] | [02] |