Sanus Systems XAS1A Install Threaded Tube Clamp & Clamp Knob, Secure Vise Assemblies to Brackets

Page 5

4: Install Threaded Tube Clamp & Clamp Knob

Slide the threaded tube clamps [05] onto the extension tubes [03], aligning the notches in the threaded tube clamp and cross tubes [02].

Snap the threaded tube clamps onto the cross tubes.

Thread a clamp knob [04] onto each threaded tube clamp [05]. Do not tighten at this time.

[02]

[03]

[06]

[05]

[02]

[03]

[06]

[05]

5: Secure Vise Assemblies to Brackets

[04]

[07]

[22]

[01]

4x

NOTE

Do not overtighten the nut [22]. The vise assembly [04] must rotate freely around the carriage bolt [07].

6901-100148 <01>

Image 5

Contents XAS1A 02 x 03 x Supplied Parts and Hardware 01 x 05 x 07 x 08 x 09 xPreparation New Installations Existing InstallationsInstall Extension Tubes Cross Tube InstallationSecure Vise Assemblies to Brackets Install Threaded Tube Clamp & Clamp KnobAttach Speaker Brackets Attach Speakers Attach Speakers Using Threaded FastenersAttach Speakers Using Hex Studs