Quick Setup Guide

Follow the steps below ensure proper installation of the VX-2c projector and DHD Controller.

Step I

Connection:

1.Connect Power to Both Projector and DHD controller

2.Connect DVI output from the DHD to projector DVI in

3.Connect Video (Composite), S-Video to1 or 2, Component 480i (RCA) input, HD signals to HD1 or HD2 (BNC), DVI

4.Turn ON the system from the DHD controller or use the DHD remote.

Step II

From the Projector:

1.Press Menu to select Main window. Use the Up or Down arrow to select Lens Adj.

2.Adjust Lens shift, Zoom, and Focus for desired screen size.

3.Press Menu to go back to Main window and select Preference for Picture Orientation.

4.Select for projector mount configuration (Floor Front, Ceiling Front, Floor Rear, or Ceiling Rear)

Step III

Calibration and Setup:

1.Make sure you have picture on the screen from all connected sources.

Note: The system must be setup first by using S-Video or Component 480i (RCA input) preferably Component 480i first.

2.Select Component SD from the DHD controller.

3.Using a test disc and select the Pluge pattern for Brightness and 10-step gray scale for Contrast

4.From the DHD controller, select Calibration, press Enter and under ISF Night select Input Image.

5.Adjust for correct Brightness and Contrast.

6.Select 80 IRE from test disc. Go to projector.

7.Press Menu to select Main window. From Main window select Image and press Enter.

8.Select Contrast and press Enter.

Under Contrast you have Red, Green, and Blue selection.

9.Use the Up and Down arrow to select Green or Blue and press Enter. The cursor will blink from the selected color. Use the UP or Down arrow to adjust. Pres Enter when done to store the number.

Note: Decrease the value to set for desired temperature.

10.Select 20 or 30 IRE window for low-end adjustment

11.Select Brightness and adjust RED, Green, or Blue for D6500. Note: Decrease the value to set for D6500.

12.Select color bar from test disc.

13.From the DHD controller select Calibration, press Enter and under ISF Night select Input Image and select Color and press Enter

14.Use the Blue Filter (required) and adjust for correct color setting.

*From this point on, the Projector should not be touched and all other adjustments for other sources must be done at the DHD Controller.

15. For other NTSC sources, select Calibration, press Enter. Under ISF Night, select Input Image and adjust for correct Brightness, Contrast, Color, Tint, and sharpness.

Step IV

HD and DVI Setup:

From DHD controller

1.For HD input and DVI, select Calibration press Enter and under ISF Night select Input Image for video adjustments.

2.Select Input Color for white balance adjustments.

VX-2c specifications

The Runco VX-2c is a high-performance home theater projector that represents the pinnacle of advanced projection technology. Known for its exceptional image quality and versatile features, it has become a favorite among home cinema enthusiasts and professionals alike. With a striking design and powerful capabilities, the VX-2c is engineered to deliver an immersive viewing experience that rivals commercial theaters.

One of the standout features of the Runco VX-2c is its advanced video processing technology. The projector is equipped with Runco’s proprietary Runco Digital High-Definition Processing System (DHD), which significantly enhances image clarity and color fidelity. This technology supports 4K resolution, ensuring that even the most detailed images remain sharp and vibrant. The projector's native resolution is an impressive 1080p, but it can up-convert lower resolution content, making it versatile enough to handle a variety of media formats.

The VX-2c also boasts an exceptional contrast ratio, which contributes to deeper blacks and more detailed shadow areas. With a contrast ratio of up to 10,000:1, viewers can expect outstanding picture quality, even in darker scenes. The color accuracy is further complemented by Runco’s Color Fidelity technology, allowing users to enjoy a wide color gamut that fills the screen with lifelike hues.

Installation versatility is another key characteristic of the Runco VX-2c. The projector features a lens shift function, which allows for flexible positioning without compromising image quality. It also supports a range of lens options, providing users the freedom to customize the projector to fit their specific home theater setups.

In terms of connectivity, the VX-2c is well-equipped to accommodate modern home entertainment systems. It includes multiple HDMI inputs, along with additional video connections, ensuring compatibility with various devices like Blu-ray players, gaming consoles, and streaming devices.

Additionally, the projector is known for its whisper-quiet operation, making it ideal for home theaters where ambient noise can detract from the cinematic experience.

Overall, the Runco VX-2c combines state-of-the-art technology, impressive performance, and aesthetic appeal, making it a standout choice for anyone seeking a premium home theater projector. Its features are designed to provide an unparalleled viewing experience, firmly establishing it as a leader in the high-end projector market.