Runco VX-2c manual Basic Troubleshooting Tips, Problem Possible Cause Solution

Page 30

BASIC TROUBLESHOOTING TIPS

The following is a basic troubleshooting guide that can assist you in resolving typical problems may result in normal operation. If you have encountered problems that are not listed in this guide, please contact your Runco dealer for assistance.

PROBLEM

POSSIBLE CAUSE

SOLUTION

The Projector does not turn on after

· The DVI cable is not connected

· Ensure it is firmly plugged into both

initial installation. The Power LED on

between the Controller and Projector,

the Controller and the Projector.

the front of the Controller stays red

or is connected improperly.

· Verify that the AC outlet is active, or

after the power button is pressed.

· The projector is not plugged in, or

that the Projector is plugged in.

 

its AC outlet is not active. Look at its

 

 

power LED and see if it is illuminated.

 

 

 

 

The Projector and Controller are both

· The Controller is on the wrong source.

· Press MENU on the Projector’s

on, but there is no video image on-

· The Controller is on the correct

remote, and look to see which source is

screen.

source, but the source itself is off.

active (the arrow will be pointing to the

 

 

active source). Select the correct source

 

 

as appropriate.

 

 

· Turn on the source. It is recommended

 

 

that all sources be turned on first

 

 

BEFORE the VX-2c.

The Projector is producing a ‘split

· A progressive scan DVD is plugged

· Only NTSC/PAL can be input to the

screen’ or an otherwise scrambled

into Component input rather than the

Component input. Progressive scan

image.

RGB/Component input.

must go into RGB/Component.

 

 

 

The image appears too bright, and there

· Contrast is set too high.

· Turn down the CONTRAST level on

is a loss of definition in the brightest

· The DVD player is set for a high-level

the Controller.

areas of the image.

output.

· Set the DVD player for a nominal

 

· The video signal has not been

output (no boost or gain).

 

terminated properly somewhere in the

· Ensure all video signals are

 

system.

terminated in 75 Ohms.

The image appears too ‘washed out’, or

· Brightness is set too high.

· Turn down the BRIGHTNESS level

the darkest areas of the image appear

· The DVD player may be set for too

on the Controller. If possible, use a

too bright.

high of a brightness level.

PLUGE pattern to set the brightness

 

 

level properly.

 

 

· Set the DVD player for a nominal

 

 

output (no boost or gain).

 

 

 

The colors of the image appear

· The Red, Green and/or Blue outputs

· Check the cable connections on

abnormal

of the Controller or inputs to the

the back of the Controller or on the

 

Projector are reversed.

Projector.

 

· The Pr and Pb inputs on the

 

 

Component input on the Controller are

 

 

reversed

 

 

 

 

The Projector will not turn back on

· The Projector will not turn on for two

· Wait two minutes until the LED on the

after it was powered-down, or the

minutes after power-down to protect its

front of the Controller turns red.

image disappears during operation.

bulb.

 

 

· The bulb has failed

 

29

Page 29 Page 31
Image 30
Page 29 Page 31
Contents VX-2c Table of Contents » The features you’ll enjoy include IntroductionProduct Disposal Information Declaration of Conformity Limited Warranty What is Covered Under the Terms of this WarrantyTo Obtain SERVICE, Contact Your Runco Dealer Projector Description Projector Rear PanelDHD Controller Description Inputs OutputsDVI OUT Video 1 InputRemote Control Description Quick Setup Guide Quick Setup Guide Analog Inputs Digital InputsISF Calibration Lens Shift Range Lens Option 4 Throw Distance 2.35 3.60 x Width of Screen Example of Horizontal and Vertical Lens Shift Menu Description and Navigation » Projector ControlWt. Balance Main MenuWt. Balance Orient Lens Adj Proj. Info Advanced Gain Offset GammaShift L/R Shift U/D Lens Zoom Lens Focus OrientLens Adj PreferenceAdvanced Diagnose Lamp Color Reset to Default ServiceProj. Info Proj. InfoBrightness GainRed Green Blue GainFloor F Ceiling F Floor R Ceiling R GammaOrientation GammaLamp Normal Color Enable TestsDiagnose Lamp Hours Lamp S/N Change LampColor Reset to DefaultService Gamut Color Space Color TempExt Test Color EnableRed Green Blue Yellow Cyan Magenta Color Bar 75 IRE Color Bar 100 IRE External H RampManual TestsGamut Tests5000K 6500K 9300K Color SpaceColor Temp Color SpaceManual White Red Green BlueColor Space Coordinates for Reference Gamut Basic Troubleshooting Tips Problem Possible Cause SolutionCommand format single command command value i.e. brightness RS-232 CommunicationsRS-232 Commands Command Parameter Value Stored? Description Min/maxRS-232 Commands Specifications Dimensions Output ResolutionPower Requirements Limited Warranty

VX-2c specifications

The Runco VX-2c is a high-performance home theater projector that represents the pinnacle of advanced projection technology. Known for its exceptional image quality and versatile features, it has become a favorite among home cinema enthusiasts and professionals alike. With a striking design and powerful capabilities, the VX-2c is engineered to deliver an immersive viewing experience that rivals commercial theaters.

One of the standout features of the Runco VX-2c is its advanced video processing technology. The projector is equipped with Runco’s proprietary Runco Digital High-Definition Processing System (DHD), which significantly enhances image clarity and color fidelity. This technology supports 4K resolution, ensuring that even the most detailed images remain sharp and vibrant. The projector's native resolution is an impressive 1080p, but it can up-convert lower resolution content, making it versatile enough to handle a variety of media formats.

The VX-2c also boasts an exceptional contrast ratio, which contributes to deeper blacks and more detailed shadow areas. With a contrast ratio of up to 10,000:1, viewers can expect outstanding picture quality, even in darker scenes. The color accuracy is further complemented by Runco’s Color Fidelity technology, allowing users to enjoy a wide color gamut that fills the screen with lifelike hues.

Installation versatility is another key characteristic of the Runco VX-2c. The projector features a lens shift function, which allows for flexible positioning without compromising image quality. It also supports a range of lens options, providing users the freedom to customize the projector to fit their specific home theater setups.

In terms of connectivity, the VX-2c is well-equipped to accommodate modern home entertainment systems. It includes multiple HDMI inputs, along with additional video connections, ensuring compatibility with various devices like Blu-ray players, gaming consoles, and streaming devices.

Additionally, the projector is known for its whisper-quiet operation, making it ideal for home theaters where ambient noise can detract from the cinematic experience.

Overall, the Runco VX-2c combines state-of-the-art technology, impressive performance, and aesthetic appeal, making it a standout choice for anyone seeking a premium home theater projector. Its features are designed to provide an unparalleled viewing experience, firmly establishing it as a leader in the high-end projector market.
Top Page Image Contents