Before Operation - VCR Part (Continued)
Setting the VCR Setup Menu
1Press MENU and the MAIN menu will appear.
2 Press v/V to select the SETUP menu, then press SELECT/ENTER.
The SETUP menu will appear.
3 Press v/V to choose a desired option on the SETUP menu. Then press b/B to choose a desired setting.
FUNCTION OSD
The
LANGUAGE SELECT
The
LANGUAGE SELECT can be switched among ENGLISH, SPANISH and FRENCH by pressing b/B.
AUDIO MODE
The DVD+VCR has two separate audio playback systems, the high quality VHS
AUDIO MODE can be switched between
BROADCAST TYPE (STEREO/SAP/MONO)
Multichannel Television Sound (MTS) carries stereo and/or Second Audio Program (SAP) bilingual signals. Set this display to the desired position when both MTS stereo and SAP signals are received. When only one of the MTS signal is received, the DVD+VCR automatically selects the corresponding receiving mode (Stereo or SAP) regardless of the selected position. For normal operation, the display should be in the STEREO position. The DVD+VCR will then record a STEREO program when available, and record a mono program IF the program is NOT IN STEREO. For weak STEREO and/or SAP broadcasts, changing the dis- play to mono may give clearer sound.
BROADCAST TYPE can be switched among STEREO, SAP, and MONO by pressing b/B.
AUDIO OUTPUT (STEREO/LEFT/RIGHT)
Used during playback [when AUDIO MODE
This display setting should normally be left in the stereo posi- tion, so that when a stereo tape is played, the stereo sound will be heard through the left and right channels. If a mono tape is played and the audio output is set to stereo, the same mono sound will be heard from both left and right channels.
AUDIO OUTPUT can be switched among STEREO, LEFT, and RIGHT by pressing b/B.
4Press MENU when finished.
Channel Selection
This DVD+VCR is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels
Preparation:
Connect the DVD+VCR to the desired type of antenna or cable TV system, as shown in Connecting Antenna/Cable TV to DVD+VCR on page 11.
AUTO CHANNEL PROGRAMMING
1Press MENU and the MAIN menu will appear.
2 Press v/V to select the TUNING menu, then press SELECT/ENTER.
The TUNING menu will appear.
3then press b/B to select TUNER.
Press b/B repeatedly to switch among TUNER, LINE1 and LINE2.Press V to choose the SOURCE SELECT option,
4 Press v/V to choose the AUTO CHANNEL SET option, then press b/B to set the channel.
PREPARATION