Sanyo DVC-2600 Operation with DVD Playing DVD, General Features, Moving to another Title

Page 27

Operation with DVD

Playing DVD

Playback Setup DVD

Turn on the TV and select the video input source con- nected to the DVD+VCR.

Audio system: Turn on the audio system and select the input source connected to the DVD+VCR.

Set the Output Source to DVD as shown in Setting the Output Source on page 6.

1Press OPEN/CLOSE (Z) to open the disc tray.

2facing up.

When a double-sided DVD is inserted, make sure the side you want to play is facing down.Load your chosen disc in the tray, with the label

3“LOAd” appears in the display window, and play- back starts automatically. If playback does not start, press PLAY (H).

In some cases, the disc menu might appear instead.Press OPEN/CLOSE (Z) to close the tray.

If a menu screen is displayed

The menu screen may be displayed first after loading a DVD which contains a menu.

DVD

Use b/B/v/V buttons to select the title/chapter you want to view, then press SELECT/ENTER to start playback.

Press TITLE or DISC MENU to return to the menu screen.

Notes

If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit password must be entered and/or the disc must be authorized (see Parental Control, on page 20).

DVDs may have a region code.

Your DVD+VCR will not play discs that have a region code different from your DVD+VCR. The region code for this DVD+VCR is 1 (one).

Do not keep an image or on-screen displayed for a long time.

General Features

Note

Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu.

Moving to another TITLE

DVD

1/3

When a disc has more than one title, you can move to another title as follows:

Press DISPLAY when playback is stopped, then press the appropriate numbered button (0-9) then press SELECT/ENTER to select a title number.

Moving to another CHAPTER

DVD 1/12

When a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter as follows:

Press BACKWARD (.) or FORWARD (>) briefly during playback to return to the beginning of the cur- rent chapter or to select the next chapter.

Press BACKWARD (.) twice briefly to step back to the previous chapter.

To go directly to any chapter during playback, press DISPLAY. Then, press v/V to select C (chapter). Then, enter the chapter number using the numbered buttons (0-9). Then, press

SELECT/ENTER.

Slow Motion DVD

1Press PAUSE/STEP (X) during playback. The DVD+VCR will now go into PAUSE mode.

2Press BACKWARD (.) or FORWARD (>) during pause mode.

The DVD+VCR will enter SLOW mode.

3Use BACKWARD (.) or FORWARD (>) to select the required speed: t 1/16, t 1/8, t 1/4 or t 1/2 (backward), or T 1/16, T 1/8, T 1/4 or T 1/2 (forward).

4To return to playback, press PLAY (H).

OPERATION

27

Image 27
Contents DVC-2600 Regulatory Information FCC Part Safety PrecautionsImportant Safety Instructions Table of Contents Playable Discs Remote control battery installationRemote Control Operation Range Before UsePrecautions About SymbolsSetting the Output Source Front Panel REC Display WindowRemote Control Rear Panel Connections Connecting Antenna/Cable TV toOptional, Preferred TV Connections Connections Basic TV ConnectionsAccessory Audio/Video A/V Connections to Connections Optional, Preferred TV ConnectionsDigital Multi-channel sound Setting the On-Screen Display Before Operation VCR Part On-Screen Display OSDMenu Selection Channel Selection Before Operation VCR Part Setting the VCR Setup MenuBefore Operation VCR Part Setting the Clock Auto Clock SetManual Clock Set Before Operation DVD Part General Explanation On-Screen DisplayOn-screen display operation Picture Before Operation DVD Part Initial SettingsGeneral Operation LanguageBefore Operation DVD Part SoundOthers Rating DVD Changing the 4-digit passwordIf you forget your 4-digit password Parental ControlSpecial Effect Playbacks Operation with tape Normal PlaybackTo record one TV program while watching another Timer RecordingOperation with tape Normal Recording To pause the recordingPress Menu to return to the TV screen Checking Erasing the Timer ProgramOperation with tape Program PriorityPress REC z twice Instant Timer RecordingChecking the Recording Time To extend the Recording TimeTV screen Multichannel TV Sound Indicator MTSMTS Multi-Channel TV Sound SAP Second Audio Program RecordingAdditional Information Operation with tape Tape Counter Memory FeatureMoving to another Chapter General FeaturesOperation with DVD Playing DVD Moving to another TitleOperation with DVD General Features Special DVD Features Operation with Audio CD and MP3 Discs Programmed Playback with Audio CD and MP3 Discs Programmed Playback CD MP3Video Mode Setting DVD Additional Information DVD PartAbout MP3 Symptom Cause Correction TroubleshootingMoisture Condensation DVD+VCR is in Timer modeLanguage Code Language Code ListGeneral SpecificationsVCR Specifications DVD Specifications