|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Connections to other equipment |
|
|
|
| (continued) | ||||||||||||||
To connect an audio system
This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the TV’s remote control.
To control the audio, turn on the TV and the stereo amplifier, and turn off the TV’s
Rear of the unit
Amplifier
ENGLISH
To VAR. AUDIO OUT | To Audio (L) Input | To Audio (R) Input |
| ||
| Audio cord (not supplied) |
|
NOTE:
To hear sound when using an external audio amplifier, the volume of both the TV and the amplifier must be set above 0 (zero).
For example, if the volume of the TV is set to 0, you will not be able to hear any sound, even if the volume of the amplifier is at its highest level.
To connect a HDMI or a DVI device to the unit
The HDMI1/DVI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device.
When you connect to a DVI device with a
Side of the unit
To PC/DVI | Audio cord (not supplied) | To DVI output |
AUDIO IN | ||
| HDMI - to - DVI adapter cable | DVI device |
| (HDMI type A connector) | |
To | (not supplied) | or |
HDMI cable (type A connector) | ||
HDMI1/DVI IN | (not supplied) | HDMI device |
| To HDMI out | |
|
|
NOTE:
• When using HDMI 1/DVI IN to connect your HDMI or DVI devices, you must select the corresponding audio input source (HDMI or DVI) on the menu screen (see page 19). Otherwise you will only see the image with no sound.
• If you connect an external component (cable box, satellite receiver, etc.) to this LCD TV using an HDMI cable or a DVI to HDMI cable, the image will not display if the output resolution of the component is set to 480i. To receive the picture you must change the output resolution on the external component.
• Should you require further instruction, please contact the manufacturer of the external component.
35
56Q0221A_eng.indd 35
1/11/11 3:24:35 PM