Tuning of the Channels
Up to 256 broadcast stations in your reception area can be stored in the electronic memory.
There are three ways of tuning as follows;
1. Automatic Tuning (the basic way):
All receivable channels are automatically tuned in and memorized in consecutive programme position.
2.Semi-Auto Tuning:
Use to preset a receivable channel in any desired programme position, e.g. the position with the same number as the channel.
3.Manual Tuning:
Manually tune a channel if it cannot be automatically tuned, such as when the signal is poor.
Automatic Tuning
1 Press the MENU button for MAIN menu display.
2 Select “PRESET” by pressing the Programme UP or DOWN button.
PICTURE
AUDIO
PRESET
LANGUAGE
3 Press the VOLUME + or - button for PRESET menu display. On entering PRESET display, Automatic Tuning will be selected initially.
MODE | AUTO |
SEARCH | START |
POSITION | 1 |
SYSTEM | AUTO |
SIF | BG |
4 Select “SEARCH” by pressing the Programme UP or DOWN button.
MODE | AUTO |
SEARCH | START |
POSITION | 1 |
SYSTEM | AUTO |
SIF | BG |
5 Press the VOLUME (+) button to start channel tuning.
CH
MENU | 1 |
CH
After all receivable channels have been found and stored, the TV set automatically returns to pro- gramme position “1”.
■The Automatic Tuning operation can be cancelled at any time by pressing the Programme UP or DOWN button.
Semi-Auto Tuning and Manual Tuning
1 Press the MENU button for MAIN menu display.
2Select “PRESET” by pressing the Programme UP or DOWN button.
3 Press the VOLUME + or - button for PRESET menu display. On entering PRESET display, Automatic Tuning will be selected initially.
4 Select “SEMI” or “MANUAL” by pressing the VOLUME + or - button.
5 Select “SEARCH” by pressing the Programme UP or DOWN button.
MODESEMI
SEARCH START
POSITION 6
SYSTEM AUTO
Press and release the VOLUME + or - button to search for required TV station. Once a station is located, tuning will automatically stop. Continue till desired channel is located.
MODESEMI
SEARCH
POSITION 6
SYSTEM AUTO
Manual Tuning :
Press and hold the VOLUME + or - button to search for required TV station.
MODE | MANUAL |
SEARCH |
|
POSITION | 6 |
SYSTEM | AUTO |
The VOLUME + button will move tuning toward the higher frequencies, and the VOLUME - but- ton will move tuning toward the lower frequencies.
6 Once desired channel is located, select “MEMORY” by pressing the Programme UP or DOWN button.
7 Press the VOLUME + or - button to enter the desired channel into memory.
SKIPOFF
MEMORY OK
SELECT | ADJUST |
BACK | EXIT |
To preset other Programme Positions, repeat steps
8 Press the MENU button to return to normal TV display.
11