Connecting Other Equipment
Connecting to the Front AV2 Input Jacks
Input (AV2) | ||
To Video | To Audio | To Audio |
Note: For monaural model TV there is no L/R audio input terminals. If the video player is stereo, connect the Left (L) audio output terminal from video player to audio input terminal on the monaural TV set (more details see your video player manual book).
It is convenient to use the AV input jack on the front panel for equipment that is often connected and disconnected.
■ To watch the Front AV2 video
input picture, select AV2 | AV2 | |
position by pressing the TV/AV | ||
| ||
Selector. |
|
Video/DVD Player
Connecting to the Monitor Output Jacks
| INPUT | MONITOR OUT |
|
AV1/DVD |
|
| |
CR | R | R |
|
| (MONO) |
| To Audio |
CB | L | L |
|
|
|
| To Audio |
Y |
| V |
|
|
| I |
|
| VIDEO | D | To Video Output |
|
| E | |
|
| O |
|
To video and audio inputs
VCR for Recording
The picture signal being displayed on the TV screen is output through the Monitor Output Jacks. Use these terminals to record TV broadcasts and for video dub- bing from AV1 or AV2 input terminals.
■To record TV programme, select TV mode by pressing the TV/AV Selector and record the desired programme.
15 TV mode
■To dub video from the AV1 terminal input, select AV1 position and by pressing the TV/AV Selector.
AV1
AV Connection To the Aerial Socket
The AV apparatus can also be connected to the aerial socket of your TV receiver.
Presetting to watch the video input
PLAYBACK
1.Playback the VCR .
2. Tune a VCR playback in programme position |
|
|
that you want. (See |
| VCR for |
Manual Tuning on pages 11.) |
| |
Aerial Socket | playback | |
|
|
For further details concerning this connection and adjustment, refer to the operating instructions for the AV equipment.
16