Sanyo DVR-S120 Playing Back MP3 Discs, Repeat Playback, Random Playback, Intro Playback

Repeat Playback, Random Playback, Intro Playback

Each press of the PLAY MODE button during playback displays the play modes. Press the k button to select the desired play mode.

Playback Mode	Explanation of Operation
Repeat Track	Repeats the track currently being played.
Repeat Disc	Repeats all tracks.
Repeat A-B	Repeats only a specified section. To select a
	specified section, press the k button at the
	repeat start point (A). The display changes to
	Repeat B. Press the k button again at the
	repeat end point (B).
Shuffle	Selects and plays tracks on the disc at random.
Scan	Plays back only the first ten seconds of each
	track.
(None)	Select this to cancel the PLAY MODE setting.
	(The setting is cancelled even if you do not press
	the k button.)

Playing Back a Specific Track

You can specify a track to play back by performing the following operation during playback or while playback is paused.

1.Press T/C to display the "T/C Tools" menu.

2.Select "Track" using 8 or 2.

3.Press the number buttons or 4 6 to specify the number of the desired track to play back.

•You can advance to the next track by pressing NEXT f.

•You can return to the pervious track by pressing PREV d.

Playing Back from a Specific Point by Time Search

You can specify the time (hours : minutes : seconds) and play back from that time.

The time can be specified only for a track that is currently being played. Perform the following while the desired track is being played.

1.Press T/C to display the "T/C Tools" menu.

2.Select "Search" using 8or 2, and press the kbutton The frame for entering the time is displayed.

Move to the desired digit by 46, and press the number buttons to specify the time.

3.Press the k button. Playback starts from the specified time.

NOTE:

-When “Playback Mode” is on, “Time Search” is not avairable. See the table above on “Playback Mode”.

Playing Back MP3 Discs

Play back

1.Insert a MP3 disc.

2.“Track, Album and Artist” will be displayed on the screen.

3.MP3 CD will be played automatically.

NOTE:

-When the information for track, album and artist are not recorded, they will not be displayed.

Playing Back a Specific Album or Track

You can specify an allbum or Track to play back by performing the following operation during playback or while playback is puased.

1.Press T/C to display the “T/C Tolls” menu.

2.Select “Album” or “Track” using 8 or 2.

3.Press the number buttons or 4 6 to specify the number of the desired album or track to play back.

Stopping playback

Press e to stop playback.

Pausing/cancelling a pause

Press PAUSE s to pause playback.

To resume playback, press w.

Skipping a track/returning to the beginning of a track

Press NEXT f during playback or pause to skip to the next track. Press PREV d during playback or pause to skip back to the previous track.

You cannot fast-forward or fast-reverse while playing back MP3 discs.

NOTE:

-The file system is ISO9660 Level 1 and Level 2.

-If the CD has both audio CD tracks and MP3 files, only audio CD tracks are played.

-It would take 30 seconds or more for this unit to read MP3 files depending on its structure.

-This unit can recognize up to 999 files or folders per disc. A CD with 1000 files or folders and over cannot read by this unit.

-MP3 CDs may not be played in the recorded order.

-MP3 files must have the extension letters, “.MP3” or “.mp3”.

-Standard, sampling frequency, and the bit rate:

MPEG:1 Audio Layer 3 44.1kHz, 48kHz

56kbps to 256kbps (constant bit rate)

-The recommended recording setting for a high-quality sound is 44.1kHz of sampling frequency and 128kbps of constant bit rate.

-Limitations on display

Available letters for display are the following: numbers 0 through 9, and capital or lower-case alphabet characters A through Z.

-Some MP3 CDs cannot be played back depending on the recording conditions.

-The CD has no music data or non-MP3 files cannot be played back.

-The WMA files cannot be played back.

-Customers should also note that permission is required in order to download MP3 files and music from the Internet. SANYO has no right to grant such permission. Permission should always be sought from the copyright owner.

-MP3 discs hold about ten times more tracks than audio CDs. Due to the large number of tracks, tracks are divided and saved in groups. These groups are called “folders.” Folders are given names that indicate their content.

		Folder1				Folder2
Track1	Track2		Track3	Track4	Track1	Track2	Track3

25