Sanyo DVR-S120 instruction manual Audio Output Settings, Operation and State Display Settings

Page 33

Audio Output Settings

1.Turn the TV on and select input from the DVD recorder. (For details on operation methods, refer to your TV’s manual.)

2.Press SYSTEM MENU to display the System Menu.

3.Select “Sound” using 8or 2, and press 6once. The setting items at "Sound Options" on the right of the screen can now be selected using 8 or 2.

4.Select the item to be changed using 8 or 2, and change the set- tings.

Operation and State Display Settings

1.Turn the TV on and select input from the DVD recorder. (For details on operation methods, refer to your TV’s manual.)

2.Press SYSTEM MENU to display the System Menu.

3.Select “Feature” using 8or 2, and press 6once. The setting items at "Feature Options" on the right of the screen can now be selected using 8 or 2.

4.Select the item to be changed using 8 or 2, and change the set- tings.

System Menu

Video

Sound

Feature

Language

Sound Options

Digital Output

All

Analog Output

Stereo

Night Mode

 

System Menu

Video

Sound

Feature

Language

Feature Options

Access Control

Press OK

Status Display

Resume

Auto Standby

Recording

Setup

Recording

Setup

Clock Display: Off

PBC Enable

Setting Item

 

Explanation

 

 

Digital

Set output from the digital audio output terminal.

Output

When you press the k button, the selection items

 

are displayed. Select digital output using 8or 2, and

 

press the k button.

 

Off

Select this when digital audio output is not

 

 

used.

 

PCM Only Dolby Digital and MPEG-2 multi-channel

 

 

signals are converted to PCM (Pulse Code

 

 

Modulation). This setting is for receiv-

 

 

ers/amplifiers without digital multi-channel

 

 

sound decoders. DTS is not converted into

 

 

PCM. (Sound does not output.)

 

All

Dolby Digital and DTS signals are fed

 

 

unaltered to the digital output. MPEG-2

 

 

multi-channel signals are converted to

 

 

PCM (Pulse Code Modulation). This set-

 

 

ting is for receivers/amplifiers with digital

 

 

multi-channel sound decoders.

Analog

Set output from the analogue audio output terminal

Output

(L/R AUDIO OUT).

 

When you press the k button, the selection items

 

are displayed. Select analogue output using 8or 2,

 

and press the k button.

 

Stereo

For devices without DolbySurround or

 

 

TruSurround. Use this setting if the DVD

 

 

recorder is connected only to a stereo TV

 

 

set.

 

Surround

Dolby Digital and MPEG-2 multi-channel

 

 

are mixed down to a DOLBY surround-

 

 

compatible two-channel output signal. For

 

 

devices with Dolby Surround Pro Logic

 

 

decoder.

 

 

Night Mode

Night mode optimises the sound for playback at low

 

volume. You are therefore less likely to disturb your

 

neighbours. This only works for Dolby Digital audio on

 

DVD video discs. This option can be selected if required.

 

Night Mode works only when analog output.

 

To use this feature, press the k button to select it.

 

Each press of k selects or deselects this setting.

NOTE:

-When you press 4, other items in the System Menu can be selected. Set other items as necessary.

5. To end setting, press SYSTEM MENU.

Setting Item

Explanation

 

 

Access

Parental Level Control

Control

Accessing of DVD discs can be controlled.

 

For details, see “Parental Level Control” on page 34.

Status

Along with the on-screen menu, the OSD (On Screen

Display

Display) also displays information on the current operat-

 

ing status (counter, playback, recording, TV channel,

 

etc.) on the TV screen. By default, this would be off, to

 

see the information about the operating status, check

 

the “Status Display” box. This appears in every selected

 

mode for a few seconds and disappears.

 

To use this feature, press the k button to select it.

 

Each press of k selects or deselects this setting.

Resume

If playback of a pre-recorded DVD video disc is inter-

 

rupted (rOPEN/CLOSE), when the disc is reloaded

 

(disc is started), playback starts at the precise location

 

where it stopped. This applies not only to the current

 

disc but to the last 20 discs played. This feature can

 

be switched off if not required.

 

To use this feature, press the k button to select it.

 

Each press of k selects or deselects this setting.

 

 

Auto

To set whether or not to set the standby mode when

Standby

no operations have been performed for 10 minutes.

 

When no DVD recorder operation has occured for

 

10 minutes after e(STOP) button is pressed , this

 

unit will go to standby mode. This function works CD

 

media(Audio, MP3 or JPEG) only.

 

To use this feature, press the kbutton to select it.

 

Each press of k selects or deselects this setting.

 

 

Clock

To save power, you can switch off the clock display on

Display: Off

the DVD recorder. Programmed (TIMER) recordings

 

will still take place.

 

If the recorder is switched off (button o), the clock

 

display is also switched off when checked.

 

If the recorder is switched off (button o), the

 

clock display is visible when unchecked.

 

To use this feature, press the kbutton to select it.

 

Each press of k selects or deselects this setting.

 

 

NOTE:

-When you press 4, other items in the System Menu can be selected. Set other items as necessary.

5. To end setting, press SYSTEM MENU.

32

Page 32 Page 34
Image 33
Page 32 Page 34
Contents DVR-S120 Precautions Disposal of PlugReplacing Fuse Contents Front Panel Part Names & FunctionsRear Panel Remote Control Front panel display Operation Status DisplayStatus display on TV screen Recordable DiscsTitle 1 01/01 OTRPlayable Discs Cleaning discs for high quality recordingAbout Titles, Chapters and Tracks TitleConnecting to a TV and Various AV Equipment INSTALLATION, Connection & Setting the ChannelConnecting to a TV Aerial and TV connectionsConnecting to a TV with an S-video and audio leads Connecting a satellite receiver Connecting audio equipmentConnecting to a digital audio device Connecting to a video deck and other recording equipment Connecting to a stereo audio amplifier or receiverAudio/video lead Connecting to a DV camcorder Video lead not suppliedNot supplied Open the lid Initial Settings Connecting the Main LeadSetting the Clock Auto-setting the channelManually Setting the Reception Channel Displaying the channel setup screenSetup Options Auto Install Manual Search Arranging and Deleting ChannelsSort Channel List Recording Recording Programmes during ReceptionREC DVD RW Timer recording by Video Plus+ code Timer RecordingProgram Date Start End Time Timer ListProgram Timer SetupDate StartChecking, Changing and Deleting Reservations Problem solving for programmed recordingsInserting New Recordings on a DVD+RW Recording Video from Other AV EquipmentSAT Record Automatic recording from Satellite Receiver New recording will be inserted Stop recording with eDisc Playback Basic OperationsAngle Basic Playback Operations Playable DiscsRepeat Playback, Random Playback, Intro Playback Playing Back MP3 DiscsPlaying Back a Specific Track Playing Back from a Specific Point by Time SearchSearching for Photos in the Thumbnail Screen Displaying the Thumbnail ScreenDisplaying Photos in the Slide Show Editing Chapters Editing & Disc ManagementEditing Titles Disc settingsTo cancel disc protection Protecting Discs and Cancelling Disc ProtectionFinalising DVD+R Discs Make DVD CompatibleDVD Recorder Settings TV Screen SettingsVideo Sound Feature Language Recording Setup Operation and State Display Settings Audio Output SettingsSetting the Language Setting parental level control Recording SettingsParental Level Control SATTo play back a DVD video set with parental level controls Set Parental ControlsPress OK Symptom Cause Solution TroubleshootingReset the DVD Recorder Maintenance SpecificationsCleaning the cabinet Guarantee to Customer
Top Page Image Contents