Sanyo DWM-390 instruction manual Basic Operation, Preparations, Basic Playback, Important Note

BASIC OPERATION

Preparations

•Turn on the power (TV, Audio System, AV amplifier, etc.).

•Select the video input source from your television. (Please refer to your TV instruction manual.)

TV

•Select the playback picture size according to the aspect ratio of the TV. (For more details, see “Setting Display” on page E32.)

4:3 LB	4:3 PS	16:9 :
(Letterbox):	(Panscan):

•Select the audio input source (Audio System, AV amplifier, etc.).

•When the DVD video player is connected to the COMPONENT VIDEO OUT jacks of the TV (see pages E8, E10, and E11), you must select the INTERLACE or PROGRESSIVE position.

Note: Initial setting is “INTERLACE”.

1.Turn on the power (TV and DVD video player).

2.In “No Disc” mode, press and hold down [ a ] on the DVD

video player until “” (INTERLACE) or “ ” (PROGRESSIVE) appears on the TV screen.

Conventional TV: Select “ ”.
TV with Progressive-scan Capability: Select “	”.
Note:

In “ ” mode, the closed caption may not appear on the TV screen.

Important Note:

•This instruction manual explains the basic instruction of this unit using the remote control.

•Some DVD video discs have different functions that may not be explained in this instruction manual. You may need extra instructions. In this case, please follow the instructions displayed on the TV screen or jacket or case of the disc.

•“ ” may appear on the TV screen during operation. This icon means that the function is not available on the disc now.

•For improvement, FL displays and on-screen displays subject to change without notice.

Basic Playback

Notes:

•Do not touch the disc tray while it is moving.

•Never place anything except a disc on the disc tray. Foreign objects can damage the unit.

•Do not apply excessive force to the disc tray.

•Discs must be placed on the disc tray one at a time.

When operation buttons are pressed, that operation is displayed on the TV screen. The display turns off after several seconds.

3	2, 4			5 1
	f	e	n	a
	q			z/ON

z /ON	LAST MEMO	PICTURE	OPEN/CLOSE	2, 4
		MODE
1
SURROUND PROGRAM/RANDOM		REPEAT	A-B REPEAT
ON SCREEN	ZOOM	ANGLE	ANGLE
			REPLAY
SUBTITLE	SETUP		MENU
CHANGE
		4
SUBTITLE
ON/OFF
	b	ENT	a
AUDIO	TOP MENU		RETURN
		5
REV SLOW			FWD SLOW
	PAUSE/STEP
PREV			NEXT
	PLAY
REV			FWD	5
			CLEAR

1 2 3 C

1.Press [z/ON].

•“SANYO” logo appears on the TV screen.

•“------” blinks, and then “NO dISC” appears on the FL display.

2.Press [q] (or [OPEN/CLOSE] on the remote control).

•“OPEN” appears on the FL display and the disc tray opens.

Note:

To open or close the disc tray, be sure to press [q] (or [OPEN/CLOSE] on the remote control). Do not press the disc tray with your hand.

3. Place the disc with the label facing up on the disc tray.

or

For 5-inch (12cm) disc For 3-inch (8cm) disc

-E15-