Hollywood VR-652 manual Basic Operation, Listening to a Program Source, Turn the power on

Page 15

VR-652(A) 2008.3.6 5:32 PM 페이지 15

Basic Operation

■Before operation

•Before operating this unit with the supplied remote control, refer to "UNIVERSAL REMOTE CONTROLS" on page 12 for details about operation.

LISTENING TO A PROGRAM SOURCE

1. Turn the power on.

•Each time the POWER ON/STANDBY button is pressed, the unit is turned on to enter the operating mode(the POWER ON/STANDBY indicator lights up blue) or off to enter the standby mode(the POWER ON/ STANDBY indicator lights up amber).

•On the remote control, press the POWER ON button to enter the operating mode or press the STANDBY button to enter the standby mode.

•In the standby mode, if the SOURCE SELECT,

PLAY/PAUSE (▶/ ■■ ) or OPEN/CLOSE(▲■ ) button is pressed, the unit can be also turned on.

■Standby mode

This means that the unit is not disconnected from the AC mains and a small amount of current is retained to support the operation readiness.

■Setting the power off mode

You can set the power off mode to either the standby mode or the power saving mode and can save energy more in the power saving mode than in the standby mode.

•Depending on whether the STANDBY button on the remote control for more than 2 seconds either in the standby mode or in the power saving mode, it is set to the power saving mode(time display is turned off) or the standby mode.

■Note

•Depending on the power off mode setting, when the power is turned off, it enters the mode you set.

2. Select the desired input source.

3. Turn on the source component for playback.

•In case of connecting the active subwoofer, turn on the active subwoofer.

4. Operate the selected component for playback.

5. Adjust the(overall) volume to a comfortable listening level.

6. To mute the sound.

•"MUTING" flickers.

•To resume the pervious sound level, press the MUTING button again.

7. To listen with the headphones.

ENGLISH

• Each time the SOURCE SELECT button on the front

• Then the sound from the speakers is cut off.

 

panel, the input source changes as follows :

 

→ FM → AM → AUX → F. AUX → VIDEO → DVD

 

■Note

 

 

 

(frequency display)

Be careful not to set the volume too high when using

 

 

 

headphones.

 

 

 

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents VR-652A 2008.3.6 532 PM 페이지 Important Safety Instructions FCC Information IntroductionRead this Before Operating Your Unit Do not Expose this Appliance to Rain or MoistureMoisture condensation For Your SafetyPrecautions 120Contents System Connections Connecting AntennasConnecting Audio Component Connecting TV AC Input Cord Fluorescent Display Controls & DIsplaysFront Panel Controls Remote Sensor Disc TrayFluorescent Display Cursor Control Universal Remote ControlsEntering a Setup Code Function Table of the Numbered ButtonsEnter a 3 digit code Remove the cover Loading Batteries Remote Control Operation RangeListening to a Program Source Turn the power onTo listen with the headphones Basic OperationAdjusting the channel level/setting the FM mode Selecting a surround modeSurround modes Region code Symbol about Invalid OperationOperation of DVD player Playable disc typesAudio and Video Files Care and Handling of DiscsMP3 MP3 Definition of TermsVideo Interlaced scanProgressive scan Composite videoBasic Playback PreparationsBefore starting playback To start playback from the menu of MP3, WMA or Jpeg disc Case of CD, press the PLAY/PAUSE / button to start playTo start playback from the menu of DVD Video To stop playback and return to the menu displayTo play files from USB mass storage device To stop playback To pause playback Frame advance playback To skip ahead or back during playbackPress the Display button Displaying Disc Information During PlaybackRapid playback during playback Slow playback during playbackDuring playback, press the TOP Menu button When using a title menuWhen using a DVD menu Playing a Specific ItemAt the end of the part, press the Repeat A-B button again Repeat PlaybackRepeating a disc, title, chapter, folder, track or file Repeating the desired partStop mode, press the Random Play button Random PlaybackProgrammed Playback Playing tracks in desired orderTo add a track to the track list Playing files in desired order Clearing the programmed tracks To clear one by oneTo clear all programmed tracks When selecting Cancel When selecting Properties in the program menuClearing the programmed files To clear one by one To clear all programmed filesOpen the disc tray or select an input source except DVD Changing the Subtitle Language Changing the Audio LanguageChanging the Camera Angle Zooming IN/OUT a SceneTo select a zoom scale Changing the Video Signal Format Changing the Resolution of Component Video Output Signal→ Multi → Ntsc → PAL Initial Settings Press the Cursor button to select the language menu Setting the Language SetupTo return to the main setup menu screen Press the Cursor / buttons to select the preferred itemSetting the Video Setup When selecting the TV DisplayWhen selecting the TV System Press the Cursor button to select the setting menu When selecting the Scan TypeSetting the Audio Setup When selecting the Angle Mark Setting the Other SetupWhen selecting the CAPTIONS, Angle MARK, Screen Saver When selecting the CaptionsLevel 8 Adult When selecting the Parental ControlPress the Cursor / buttons to select the Parental Control Level 1KIDSPress the Cursor button to select the level menu Press the Cursor / buttons to select the Password When selecting the PasswordWhen selecting the Defaults Press the Cursor / buttons to select the DefaultsYesreset Listening to Radio Broadcasts Auto tuningManual tuning Operation of TunerMemory Backup Function Presetting radio stationsTuning to preset stations After selecting the tuner, select the desired preset numberRecording with Video Operation of Other FunctionsPress the CLOCK/SLEEP button for more than 2 seconds Setting the ClockOperating the Timer Before setting the timerRepeat the above steps 2 and 3 to set the off time When selecting Tuner Make preparations for timer play Adjusting the Brightness of the DisplayOperating the Sleep Timer When selecting DVD as an input sourceDVD Player Section Troubleshooting GuideRemote Control Unit Main Unit Amplifier SectionTuner Section FM Tuner Section SpecificationsAmplifier Section Video Section50 W WeightNet 3.1 kg6.8 lbsAM Tuner Section GeneralSetup Code Table CCE RCASSS TMKKLH MEISTS ABC GNCNSC HTS RSASKY VR-652A 2008.3.6 532 PM 페이지

VR-652 specifications

Hollywood VR-652 is a groundbreaking virtual reality headset that has captured the attention of tech enthusiasts and gamers alike. Specifically designed for immersive experiences, the VR-652 stands out in the crowded VR market by blending advanced technology with user-centric features.

One of the main highlights of the Hollywood VR-652 is its high-resolution display. Boasting a staggering 4K resolution across dual OLED screens, users experience stunning visuals that enhance immersion and realism. This sharp display ensures that even the finest details in games and applications come to life, making the user feel truly part of the action.

Additionally, the Hollywood VR-652 incorporates state-of-the-art motion tracking technology. With a combination of external cameras and internal sensors, the headset can track head movements with precision. This enables a fluid experience where users can look around and interact with virtual environments seamlessly. The inclusion of six degrees of freedom (6DoF) enhances this experience, allowing users to move not just their heads but their entire bodies, which adds a layer of realism that is often lacking in entry-level devices.

Comfort is a critical aspect of the Hollywood VR-652's design. It features adjustable straps and breathable padding that ensure a snug fit, allowing for extended use without discomfort. This is particularly significant for users who may spend hours exploring virtual worlds. Furthermore, the headset is designed to minimize weight, further enhancing comfort and usability.

In terms of connectivity, the Hollywood VR-652 is equipped with both wired and wireless options. The wired connection allows for a stable and high-quality performance, particularly important for demanding gaming applications. On the other hand, the wireless capability offers unrivaled freedom of movement, liberating users from being tethered to a computer. This dual-functionality makes it versatile for both casual users and serious gamers.

Another standout feature is the headset's integration with advanced audio systems. The Hollywood VR-652 comes with spatial audio technology that creates an immersive soundscape, making users feel as if sound is coming from various directions. This feature significantly enhances the overall experience, especially in gaming scenarios where audio cues are crucial for gameplay.

Compatibility is also broad, with the Hollywood VR-652 supporting a wide range of applications, from gaming to educational tools, making it accessible to a diverse audience. With ongoing updates and developer support, users can expect a continually evolving platform that keeps the device relevant and engaging.

Overall, the Hollywood VR-652 represents a significant leap forward in virtual reality technology. Its high-resolution display, advanced motion tracking, comfortable design, versatile connectivity, and immersive audio create a compelling package for anyone looking to dive into the world of VR. As the technology continues to mature, the Hollywood VR-652 positions itself as a leading option for both casual and dedicated users in the ever-expanding realm of virtual reality.
Top Page Image Contents