Hollywood VR-652 manual Adjusting the channel level/setting the FM mode, Selecting a surround mode

Page 16

VR-652(A) 2008.3.6 5:32 PM 페이지 16

Adjusting the channel level(/setting the FM mode)

• The volume level of each channel can be adjusted as desired.

ENGLISH

8. Press and hold down the SETUP button for more than 2 seconds.

•Then "Lch" is displayed for several seconds.

•When the mode display ("Lch", etc.) disappears, press the button again.

9. While displaying "Lch", press the ENTER button to select the desired mode.

•Each time this button is pressed, the mode is selected as follows :

→Lch → Rch → SW ( → FM STEREO)

( ) : Possible only when listening to FM broadcasts.

10. Adjust the level of the selected channel or set the FM mode as desired.

•The channel levels can be adjusted within the range of -10 ~ +10 dB.

•In general, we recommend the level to be adjusted to 0 dB.

•The FM mode can be set to FM STEREO or FM MONO.

•When FM stereo broadcasts are poor because of weak broadcast signals, set it to FM MONO mode to reduce the noise, then FM broadcasts are reproduced in monaural sound.

11. Repeat the above steps 9 and 10 to adjust each channel level.

Selecting a surround mode

• While playing the selected input source

• Each time this button is pressed, the surround mode changes as follows :

→ (Dolby VS REF → Dolby VS WIDE) or <DOLBY HP>

STEREO ←

( ) : Possible only when listening via the speakers.

< > : Possible only when listening via the headphones.

■Surround modes

• Dolby Virtual Speaker

This mode creates a virtual surround sound field using as few as two front speakers and subwoofer, allowing you to experience listening from 5.1 channel speakers.

* Dolby Virtual Speaker Reference("Dolby VS REF")

The width of the front sound image is defined by the actual distance between front speakers. * Dolby Virtual Speaker Wide("Dolby VS WIDE")

The width of the front sound image seems to extend beyond the front speakers.

• Dolby Headphone("DOLBY HP")

This mode simulates 5.1 channel surround sound, which allows you to enjoy 5.1 channel surround sound through 2 channel headphones, just like listening from 5.1 channel speakers.

•Dolby Virtual Speaker and Dolby Headphone modes are effective not only for 5.1 channel sources but also for stereo (2 channel) sources.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents VR-652A 2008.3.6 532 PM 페이지 Important Safety Instructions Introduction Read this Before Operating Your UnitDo not Expose this Appliance to Rain or Moisture FCC InformationFor Your Safety Precautions120 Moisture condensationContents Connecting Antennas System ConnectionsConnecting Audio Component Connecting TV AC Input Cord Controls & DIsplays Front Panel ControlsRemote Sensor Disc Tray Fluorescent DisplayFluorescent Display Universal Remote Controls Cursor ControlFunction Table of the Numbered Buttons Entering a Setup CodeEnter a 3 digit code Loading Batteries Remote Control Operation Range Remove the coverTurn the power on To listen with the headphonesBasic Operation Listening to a Program SourceSelecting a surround mode Adjusting the channel level/setting the FM modeSurround modes Symbol about Invalid Operation Operation of DVD playerPlayable disc types Region codeCare and Handling of Discs Audio and Video FilesMP3 Definition of Terms MP3Interlaced scan Progressive scanComposite video VideoPreparations Basic PlaybackBefore starting playback Case of CD, press the PLAY/PAUSE / button to start play To start playback from the menu of DVD VideoTo stop playback and return to the menu display To start playback from the menu of MP3, WMA or Jpeg discTo play files from USB mass storage device To skip ahead or back during playback To stop playback To pause playback Frame advance playbackDisplaying Disc Information During Playback Rapid playback during playbackSlow playback during playback Press the Display buttonWhen using a title menu When using a DVD menuPlaying a Specific Item During playback, press the TOP Menu buttonRepeat Playback Repeating a disc, title, chapter, folder, track or fileRepeating the desired part At the end of the part, press the Repeat A-B button againRandom Playback Programmed PlaybackPlaying tracks in desired order Stop mode, press the Random Play buttonTo add a track to the track list Clearing the programmed tracks To clear one by one Playing files in desired orderTo clear all programmed tracks When selecting Properties in the program menu When selecting CancelTo clear all programmed files Clearing the programmed files To clear one by oneOpen the disc tray or select an input source except DVD Changing the Audio Language Changing the Subtitle LanguageZooming IN/OUT a Scene Changing the Camera AngleTo select a zoom scale Changing the Resolution of Component Video Output Signal Changing the Video Signal Format→ Multi → Ntsc → PAL Initial Settings Setting the Language Setup To return to the main setup menu screenPress the Cursor / buttons to select the preferred item Press the Cursor button to select the language menuWhen selecting the TV Display Setting the Video SetupWhen selecting the TV System When selecting the Scan Type Press the Cursor button to select the setting menuSetting the Audio Setup Setting the Other Setup When selecting the CAPTIONS, Angle MARK, Screen SaverWhen selecting the Captions When selecting the Angle MarkWhen selecting the Parental Control Press the Cursor / buttons to select the Parental ControlLevel 1KIDS Level 8 AdultPress the Cursor button to select the level menu When selecting the Password Press the Cursor / buttons to select the PasswordPress the Cursor / buttons to select the Defaults When selecting the DefaultsYesreset Auto tuning Manual tuningOperation of Tuner Listening to Radio BroadcastsPresetting radio stations Tuning to preset stationsAfter selecting the tuner, select the desired preset number Memory Backup FunctionOperation of Other Functions Recording with VideoSetting the Clock Press the CLOCK/SLEEP button for more than 2 secondsBefore setting the timer Operating the TimerRepeat the above steps 2 and 3 to set the off time When selecting Tuner Adjusting the Brightness of the Display Operating the Sleep TimerWhen selecting DVD as an input source Make preparations for timer playTroubleshooting Guide Remote Control UnitMain Unit Amplifier Section DVD Player SectionTuner Section Specifications Amplifier SectionVideo Section FM Tuner SectionWeightNet 3.1 kg6.8 lbs AM Tuner SectionGeneral 50 WSetup Code Table RCA SSSTMK CCEMEI KLHSTS GNC ABCNSC RSA HTSSKY VR-652A 2008.3.6 532 PM 페이지

VR-652 specifications

Hollywood VR-652 is a groundbreaking virtual reality headset that has captured the attention of tech enthusiasts and gamers alike. Specifically designed for immersive experiences, the VR-652 stands out in the crowded VR market by blending advanced technology with user-centric features.

One of the main highlights of the Hollywood VR-652 is its high-resolution display. Boasting a staggering 4K resolution across dual OLED screens, users experience stunning visuals that enhance immersion and realism. This sharp display ensures that even the finest details in games and applications come to life, making the user feel truly part of the action.

Additionally, the Hollywood VR-652 incorporates state-of-the-art motion tracking technology. With a combination of external cameras and internal sensors, the headset can track head movements with precision. This enables a fluid experience where users can look around and interact with virtual environments seamlessly. The inclusion of six degrees of freedom (6DoF) enhances this experience, allowing users to move not just their heads but their entire bodies, which adds a layer of realism that is often lacking in entry-level devices.

Comfort is a critical aspect of the Hollywood VR-652's design. It features adjustable straps and breathable padding that ensure a snug fit, allowing for extended use without discomfort. This is particularly significant for users who may spend hours exploring virtual worlds. Furthermore, the headset is designed to minimize weight, further enhancing comfort and usability.

In terms of connectivity, the Hollywood VR-652 is equipped with both wired and wireless options. The wired connection allows for a stable and high-quality performance, particularly important for demanding gaming applications. On the other hand, the wireless capability offers unrivaled freedom of movement, liberating users from being tethered to a computer. This dual-functionality makes it versatile for both casual users and serious gamers.

Another standout feature is the headset's integration with advanced audio systems. The Hollywood VR-652 comes with spatial audio technology that creates an immersive soundscape, making users feel as if sound is coming from various directions. This feature significantly enhances the overall experience, especially in gaming scenarios where audio cues are crucial for gameplay.

Compatibility is also broad, with the Hollywood VR-652 supporting a wide range of applications, from gaming to educational tools, making it accessible to a diverse audience. With ongoing updates and developer support, users can expect a continually evolving platform that keeps the device relevant and engaging.

Overall, the Hollywood VR-652 represents a significant leap forward in virtual reality technology. Its high-resolution display, advanced motion tracking, comfortable design, versatile connectivity, and immersive audio create a compelling package for anyone looking to dive into the world of VR. As the technology continues to mature, the Hollywood VR-652 positions itself as a leading option for both casual and dedicated users in the ever-expanding realm of virtual reality.
Top Page Image Contents