Features, Programming the BR2 Remote Control

BR2 HANDHELD INFRA-RED REMOTE CONTROL

for use with the following Bryston models:

•BCD-1 CD player

•BDA-1 Digital-to-Analog Converter

•B60R Integrated Amplifier / BP6 Preamp

•B100 Integrated Amplifier / BP16 Preamp

•BP26 Preamp

FEATURES:

●Powered by two “AAA” batteries.

Replace battery by removing bottom cover plate by removing the four Philips screws on the rear of the remote unit.

●Automatic motion-sensing backlight.

Can be disabled by entering the 3 digit code “792”

●Power saving ambient light level sensor inhibits backlight when not needed.

●Solid machined aluminum enclosure and push buttons.

●Can be used with over 7 different Bryston amps & preamps

●Special function codes customize preformance

PROGRAMMING the BR2 REMOTE CONTROL:

1st)	Press and hold the CODE button on the BR2 remote until the red LED begins to flash (usually takes about 5
	seconds).
2nd)	Enter a three digit code as follows:
	7xx: SP2 PreAmp/Processor
	712: B100 integrated amplifier
	715: BCD-1 *
	721: BP26 preamp *
	722: B60R integrated amplifier & BP6 preamp
	Other codes:
	792: Disable motion sensor backlight control
	797: Enable motion sensor backlight control

The red LED will flash twice after a code has been entered successfully.

*See also Model Select Buttons below.

MODEL SELECT BUTTONS:

The D/A, CD and PREAMP buttons allow switching BR2 operation directly amongst Bryston’s BDA-1, BCD-1and various Bryston Preamps (depends on which one has been previously selected using the codes above).

PROGRAMMING/CONTROLLING the B100/BP16 via the BR2 REMOTE CONTROL:

Press the CODE button on the remote control until the red LED lights and then enter the 3 digt code as listed below. The LED will flash to confirm transmission and then extinguish.

001: select analog source 1 (A/D)		019: balance left	082: select digital source 2 (D2)
002: select analog source 2 (AUX/PH)		020: balance right	083: select digital source 3 (D3)
003: select analog source 3 (CD)		029: power on	084: select digital source 4 (D4)
004: select analog source 4 (TUNER)		058: mute on	245: set/reset Pass Through mode
005: select analog source 5	(TV)	059: mute off	247: Set Trigger 2 for current source
006: select analog source 6	(VIDEO)	061: record monitor toggle	248: Clear Trigger 2 for current source
007: volume up		062: record monitor on	255: System reset; restore defaults
008: volume down		063: record monitor off

While most of these codes are primarily intended for controlling the B100/BP16 via it’s RS232 port (with system control- lers such as those provided by Crestron or AVX, etc) they can also be sent via the BR2 infra-red remote.

For more information see the B100 Owners Manual or the BP16 Owner’s Manual.

BR2 specifications

The Bryston BR2 is a high-performance remote control designed for use with Bryston's advanced audio systems. This sleek device is aimed at audiophiles who seek both functionality and ease of use when managing their sound system. The BR2 boasts a variety of features that enhance user experience, making it a top choice for managing complex audio setups.

One of the standout features of the BR2 is its intuitive layout. The remote is equipped with ergonomic buttons that are well-spaced and clearly labeled, allowing for seamless navigation through various functions. Users can easily adjust volume levels, select input sources, and access different settings without a steep learning curve. The remote has been meticulously designed to fit comfortably in hand, ensuring that extended use does not lead to fatigue.

The BR2 utilizes advanced infrared technology, allowing for precise and reliable communication with Bryston audio components. This ensures that users can control their devices from a distance without facing issues related to signal interference. For those with expansive audio setups, the remote's range is a significant advantage.

Another notable aspect of the Bryston BR2 is its robust build quality. Crafted with high-grade materials, the remote is designed to withstand the rigors of daily use. The durable construction adds a level of reassurance that the device will remain functional over time, even in environments where it faces potential wear and tear.

In addition to its primary functions, the BR2 features programmable buttons, enabling users to customize their audio experience further. This feature allows for quick access to favorite settings or frequently used configurations, enhancing convenience and personalization.

The remote is also compatible with various Bryston products, making it a versatile addition to any Bryston audio system. Its ability to control multiple devices means that, whether you have a stereo setup or a more elaborate home theater system, the BR2 can effectively streamline your audio management.

In conclusion, the Bryston BR2 is a sophisticated remote control tailored for audiophiles who demand quality and user-friendliness. With its ergonomic design, advanced technology, and durable construction, the BR2 stands out as an essential tool for controlling an audio setup. This remote embodies Bryston's commitment to excellence in audio performance, ensuring that users enjoy their favorite music and movies with ultimate ease and enjoyment.