Bryston Programming the BCD-1 via the BR2 Remote Control, Important Safety Instructions

Page 3

PROGRAMMING THE BCD-1 via the BR2 REMOTE CONTROL:

Press the CODE button on the remote control until the red LED lights and then enter the 3 digt code as listed below. The LED will flash to confirm transmission and then extinguish.

242: To enable toggling the display ON or OFF. After entering code 242 the zero button can be used to toggle the display on or off. Reverse this procedure to deactivate this display on/off function

Enable or disable the External (remote) Trigger:

1st)

Place the BCD-1 in standby mode by pressing the POWER button on either the BCD-1 itself or on the remote

 

control until the red standby LED on the front panel of the BCD-1 (immediately above the front panel POWER

 

button) lights.

2nd)

Press the CODE button momentarily until the red LED is continuously lit.

3rd)

Enter the code 241. Every time the code is successfully entered the state of the External Trigger will toggle

 

between enabled and disabled and the status of the External Trigger will be displayed on the alpha-numeric

 

display for 2 to 3 seconds.

 

The External Trigger utilizes a control voltage (3 to 12 volts, either AC or DC) connected to the TRIGGER IN

 

port on the rear of the BCD-1. A wire-clamp connector that mates with the TRIGGER IN port is provided with

 

every BCD-1 (See page 2 for wiring details). Once enabled the BCD-1 will only be powered on when a control

 

voltage of 3-12V AC/DC at ≥3mA is present. As soon as the control voltage is withdrawn the BCD-1 will power

 

down and go into standby mode.

For more information see the BCD-1 Owners Manual

PROGRAMMING THE BDA-1 via the BR2 REMOTE CONTROL:

Press the CODE button on the remote control until the red LED lights and then enter the 3 digt code as listed below. The LED

will flash to confirm transmission and then extinguish.

 

021: source OPTO-1

026: source SPDIF-4

250: Output level 0dB

022: source OPTO-2

027: source AES/EBU

251: Output level -1dB

023: source SPDIF-1

028: source USB

252: Output level -2dB

024: source SPDIF-2

029: Power ON/OFF

253: Output level -3dB

025: source SPDIF-3

030: Upsampling ON/OFF

 

Codes 021 thourgh 030 mimic the actions of the corresponding dedicated buttons on the BR2. These codes can also be sent to the BDA-1 via the RS232 control port to facilitate the use of system controllers such as those provided by AVX, Crestron, etc.

For more information see the BDA-1 Owners Manual

IMPORTANT SAFETY INSTRUCTIONS:

The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage “ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

1.Read these instructions.

2.Keep these instructions.

3. Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not use or store near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

8.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ARE PLACED ON THE EQUIPMENT.

Image 3
Contents BR2 Features Programming the BR2 Remote ControlModel Select Buttons Programming the BCD-1 via the BR2 Remote Control Programming the BDA-1 via the BR2 Remote ControlImportant Safety Instructions Applicable Keys for Various Models Bryston Limited Warranty

BR2 specifications

The Bryston BR2 is a high-performance remote control designed for use with Bryston's advanced audio systems. This sleek device is aimed at audiophiles who seek both functionality and ease of use when managing their sound system. The BR2 boasts a variety of features that enhance user experience, making it a top choice for managing complex audio setups.

One of the standout features of the BR2 is its intuitive layout. The remote is equipped with ergonomic buttons that are well-spaced and clearly labeled, allowing for seamless navigation through various functions. Users can easily adjust volume levels, select input sources, and access different settings without a steep learning curve. The remote has been meticulously designed to fit comfortably in hand, ensuring that extended use does not lead to fatigue.

The BR2 utilizes advanced infrared technology, allowing for precise and reliable communication with Bryston audio components. This ensures that users can control their devices from a distance without facing issues related to signal interference. For those with expansive audio setups, the remote's range is a significant advantage.

Another notable aspect of the Bryston BR2 is its robust build quality. Crafted with high-grade materials, the remote is designed to withstand the rigors of daily use. The durable construction adds a level of reassurance that the device will remain functional over time, even in environments where it faces potential wear and tear.

In addition to its primary functions, the BR2 features programmable buttons, enabling users to customize their audio experience further. This feature allows for quick access to favorite settings or frequently used configurations, enhancing convenience and personalization.

The remote is also compatible with various Bryston products, making it a versatile addition to any Bryston audio system. Its ability to control multiple devices means that, whether you have a stereo setup or a more elaborate home theater system, the BR2 can effectively streamline your audio management.

In conclusion, the Bryston BR2 is a sophisticated remote control tailored for audiophiles who demand quality and user-friendliness. With its ergonomic design, advanced technology, and durable construction, the BR2 stands out as an essential tool for controlling an audio setup. This remote embodies Bryston's commitment to excellence in audio performance, ensuring that users enjoy their favorite music and movies with ultimate ease and enjoyment.