Sanyo DC-TS760 instruction manual Listening to the Radio

Page 24

LISTENING TO THE RADIO

To turn the unit on and listen to the last received station, press the TUNE/BAND button.

Automatic/Manual tuning

1.Press the TUNE/BAND button to select FM or AM.

2.Automatic tuning

Press the TUNE/PTY “+” or “–” button for at least 1 second to tune in a station. The unit will scan up or down the band and receive the next receivable station. Press the button again to continue.

Manual tuning

Press the TUNE/PTY “+” or “–” button briefly until the desired frequency is displayed.

ST

To preset stations

Up to 24 FM and 12 AM stations can be preset.

Automatic presetting (APT)

1.Press the TUNE/BAND button to select FM or AM.

2.Press the PROGRAM/RANDOM button for at least 3 seconds. “PGM” blinks.

The automatic tuning mode is set and automatic presetting begins from the low end of the band.

When 24 FM or 12 AM stations have been preset or the high end of the band is reached, automatic presetting stops. “PGM” disappears and the station memorized on channel 1 will be heard.

3.To preset stations on the other band, follow steps above.

Note:

If APT is activated, all previously programmed stations of the band will be cleared and new stations will be programmed.

Manual presetting

1.Tune in the station to be preset as described in “Automatic/Manual tuning”.

2.Press the PROGRAM/RANDOM button.

PGM

ST

3.While “PGM” is blinking, press the PRESET “+” or “–” button to select the channel to be preset.

- The number button(s) can also be used. Example: Press 9.

PGM

ST

4.While “PGM” is blinking, press the ENTER button.

-In this example, “103.25 MHz” FM station is preset on FM channel 9.

PGM

ST

ST

5. Repeat steps above to add more preset stations.

-When presetting a new station, the previous preset station is cleared.

Listening to preset stations

1.Press the TUNE/BAND button to select FM or AM.

2.Press the PRESET “+” or “–” button briefly to select the desired channel.

-The number button(s) can also be used. Example: Press 9 then

ENTER.

Preset scan tuning

1.Press the TUNE/BAND button to select FM or AM.

2.Press the PRESET “+” (e) button for at least 1 second. The channel number appears. Each of the preset stations is tuned in for 5 seconds.

3.When the desired station has been tuned in, press the PRESET “+” (e) button again to keep the reception locked at that station.

When beat interference is heard

A high-pitched noise called “beat” is sometimes heard during reception of radio broadcasts. If this occurs,

While pressing the nbutton on the main unit, press the TEST button on the remote control to select “bc-A” or “bc-B”. Select the setting that gives the best results.

To receive FM stereo broadcasts

Make sure that “MONO” is not displayed. If “MONO” appears, press the SHIFT + RDS buttons to turn the “MONO” indication off.

“ST” appears when an FM stereo broadcast is received.

-If the signal from an FM stereo station is weak and reception is poor, press the SHIFT + RDS buttons to change to the MONO mode. The reception may be improved, but the sound will be monaural.

Changing the AM reception frequencies

It is not necessary to perform this procedure in the Europe.

1.Press the TUNE/BAND button to select “AM”.

2.While pressing the nbutton on the main unit, press the PROGRAM/ RANDOM button on the remote control.

522 - 1611 kHz (9 kHz steps) wv 520 - 1610 kHz (10 kHz steps)

Listening to FM stations with RDS

RDS (Radio Data System) permits FM stations to send additional signals with the regular programme signals. For example, the stations send their station names and information about what type of broadcast programmes, such as sports or music, etc.

When tuned in FM broadcast which provides the RDS service, the “PS” RDS mode is set automatically and the station name appears on the display.

Note:

-Some FM broadcasts do not provide RDS service.

-RDS may not work correctly if the signal strength is weak.

-RDS is not available for AM broadcasts.

Selecting the RDS mode

Press the RDS button while listening to an FM station. Each time the button is pressed, the display mode changes as follows.

PS v PTY v RT v Frequency

PS (Programme Service)

The station name is displayed. If no PS signal is received, “NO PS” appears, then station frequency is displayed.

PTY (Programme Type)

The broadcast programme type is displayed. If no PTY signal is received, “NO PTY” appears, then station name or station frequency is displayed.

RT (Radio Text)

Text messages the station sends will be displayed. If no RT signal is received, “NO RT” appears.

Frequency

Station frequency (non-RDS service)

After several seconds, the PS mode returns if RDS signal is received.

23

Page 23 Page 25
Image 24
Page 23 Page 25
Contents DC-TS760 Table of Contents PrecautionsControls Front panelDisplay Remote Control Only Sanyo TVs can be operated using this remote controlControls Inserting batteriesBasic Connections Speaker connectionsJCX-TS760 Speaker placement Front right speaker Centre speaker Front left speakerSubwoofer Surround left speaker Example To hang the speaker on a wallConnecting to a TV with the video lead Aerial connectionsAM loop aerial Connecting to a TV with an EURO-AV/SCART lead Connecting to a TV with an S-video leadHeadphones Additional Connections ExamplesSystem Connections Examples JCX-TS760, TV and Audio equipmentJCX-TS760, TV and VCR AerialJCX-TS760, TV, VCR and Audio equipment JCX-TS760, TV, VCR, STB and Audio equipmentSet Top Box Before Operation Various Adjusting Selecting surround modeAdjusting the speaker volume balance Adjusting the subwoofer levelPlayable Discs Region numberDVD disc Video CD/Audio CD discDisc Play PreparationsStarting play Stopping playVarious Disc Playing Functions Picture zoom Pin point zoom DVD Viewing from a desired camera angle Multi-Angle DVDAngle replay DVD Repeat playProgrammed play VCD CD Selecting subtitle language DVDSelecting audio soundtrack language Multi- Language DVD Changing the audio channel output VCDSelecting picture mode Selecting on-screen informationExample for DVD Example for VCDMP3/WMA CD Operation Before startingMP3/WMA CD play MP3 CDPicture CD Operation Kodak Picture CD playJpeg CD play Picture zoomInitial Settings for DVD Setting languageSetting display TV TypeSetting audio Setting parentalLanguage Code List Listening to Other SourcesCode Abbreviation Language Listening to the Radio Sleep Timer Operation MaintenanceCleaning the unit Troubleshooting Guide Symptom Possible Cause Corrective ActionSpecifications Guarantee to Customer

DC-TS760 specifications

The Sanyo DC-TS760 is a compact digital camera that gained popularity for its robust design and remarkable features. Launched as part of Sanyo's innovative lineup, it is well-suited for both amateur photographers and seasoned enthusiasts looking for reliability combined with advanced capabilities.

One of the standout features of the DC-TS760 is its waterproof construction. With an impressive rating of IP68, this camera can withstand being submerged in water up to 10 feet deep for extended durations, making it an ideal companion for aquatic adventures, whether snorkeling or capturing images in the rain. Its rugged build also includes shock resistance, ensuring it can endure drops from heights up to 5 feet. This durability reaches beyond water and impact, making it dustproof, which is essential for outdoor shoots in challenging environments.

The camera comes equipped with a 16.1-megapixel CCD sensor, delivering high-resolution images that capture fine details. The sensor works in tandem with a 5x optical zoom lens, allowing for versatility in framing shots, whether capturing sweeping landscapes or distant subjects. The lens also incorporates advanced anti-blur technology, significantly reducing the effects of camera shake and enabling clearer images even in challenging lighting conditions.

The Sanyo DC-TS760 supports high-definition video recording, providing users with the ability to shoot 720p videos at 30 frames per second. This capability allows for dynamic storytelling through video, making it suitable for capturing memorable moments in a fluid and captivating manner.

Another remarkable technology featured in the DC-TS760 is its intelligent auto mode. This mode recognizes various shooting scenarios and optimizes camera settings to suit the conditions. It is ideal for users who prefer a straightforward approach without diving into manual controls. Additionally, the camera includes fun features such as face detection and smile shutter, further enhancing the user experience.

The camera's LCD display is notable for its clarity and brightness, even in outdoor settings. This makes reviewing images and framing shots under direct sunlight easier than with many other compact cameras.

In summary, the Sanyo DC-TS760 blends durability with advanced photographic technology. Its waterproof and shock-resistant design, combined with a capable sensor, 5x optical zoom, HD video recording, and intelligent shooting modes, make it a standout choice for adventure seekers and casual users alike.
Top Page Image Contents