B&B Electronics PESV1A, PES1A manual Configuring the IP Address

Page 24

Configuring the IP Address

If you need to change the IP address of the PES1A/PESV1A, you can accomplish this using the discovery software, or you can open the Web Configuration and Management Interface and do it there. (See Configuring Network Settings later in the next chapter.)

1.To change the IP address of the PES1A/PESV1A from the discovery software, click Configure IP Settings.

2.In the dialog that appears, select Manually configure network settings.

3.Type the new IP Address, Subnet Mask, Default Gateway and system password (initially dbps) in the appropriate boxes, then click Apply.

4.Click Reboot Device. This may take a minute or more to complete.

5.Click Refresh List to confirm the new IP address has been accepted.

14

Manual Documentation Number: PES1A/PESV1A-2907m

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104www.bb-elec.com

B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445www.bb-europe.com

Image 24
Contents Mini POE Ethernet to RS-232 Converters Models PES1A, PESV1AManual Documentation Number PES1A/PESV1A-2907m International Headquarters Page Manual Documentation Number PES1A/PESV1A-2907m Page Table of Contents Using the WEB Configuration and Management Using Realport Manual Documentation Number PES1A/PESV1A-2907m Features IntroductionCommunication Modes Direct IPVirtual COM Port Paired Mode Other Communications ModesIntroduction Package Checklist Hardware OverviewIndicators, Switches and Connectors Reset SwitchVoltage Output Selector Switch PESV1A only Link Integrity LED YellowEthernet Port Connector Serial Port ConnectorPower Connector Output Power Connector PESV1A onlyConnecting the Hardware Power over Ethernet PoEConfiguration Connections Connection using Midspan Power SourceHardware Overview Set up the Hardware Getting StartedConfigure the PES1A/PESV1A Configuring the IP Address Using the Discovery SoftwareConfiguring the IP Address Using the Web Configuration and Management Interface LoggingLogging Out Using Tutorial and Help Configuring Network SettingsIP Settings Network Services SettingsConfiguring the Serial Port Advanced Network SettingsPort Profile Settings RealPort TCP Sockets UDP Sockets UDP Client Settings Basic Serial Settings Serial BridgeConfiguring Alarms and Notification Advanced Serial SettingsAlarm Notification Settings Alarm ConditionsAlarm Destinations Using the Web Configuration and Management Interface System Settings Using Remote ManagementManaging Managing Users and PermissionsChanging the Root Username and Password Configuring User Access and PermissionsAdding New Users Managing Serial Ports and Connections Serial PortsConnections Managing the PES1A/PESV1A Using Administrative Features Backup/RestoreUpdate Firmware Factory Default SettingsSystem Information GeneralSerial Serial Port Diagnostics NetworkReboot Using RealPort Configuring the IP AddressConfiguring the Serial Port for RealPort Adding a Virtual COM Port using RealPort Removing a Virtual COM Port using RealPortUpdating RealPort Using RealPort Appendix a Default Configuration Settings DhcpDefault Configuration Settings Appendix B Product Specifications Manual CD-ROM discData Bits Appendix C Dimensional Diagrams Dimensional Diagram of the PES1ADimensional Diagrams Appendix D RS-232 Connections DTERS-232 Connections RJ-45 Pin Signal Wire Color PoE Appendix E Network ConnectionsNetwork Connections Appendix F Power over Ethernet PoE Power over Ethernet Alternative aPower over Ethernet Alternative B
Related manuals
Manual 31 pages 34.64 Kb