Managing the PES1A/PESV1A
Changing the Root Username and Password
You may want to change the Root username and password after you have gained access to the Web Configuration and Management Interface. To change your username and password click Users under the Configuration menu. Follow the prompts to enter a new username and password. Click Apply to complete the procedure.
Adding New Users
The root user of the PES1A/PESV1A (using the default username and password) has complete administrative rights, including access and control of all configuration parameters. As administrator you can add other users and configure the specific rights of each.
1.In the Configuration menu, click Users. The User Configuration page appears.
2.Click New. The Add New User page appears.
3.Type a new username in the New Username box.
4.Type a new password in the New Password box. The characters you type will be masked by asterisks.
5.Type the new password again in the Confirm Password box. The characters you type will be masked by asterisks.
6.Click Apply. After a short delay a message box appears at the top of the page announcing, “Changes have been saved successfully.”
Configuring User Access and Permissions
1.In the Configuration menu, click Users. The User Configuration page appears.
2.Click the username to be configured. The User Configuration – Username page appears. To change the username or password, make the changes under User Configuration and click Apply.
28 | Manual Documentation Number: |
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353