Cobalt Networks 9032-SD Video Delay, Reset Frame Sync, Display Orientation, Display Brightness

Page 14

Video Delay

Reports the current amount of video delay in ms.

Reset Frame Sync

Resets the frame sync, clearing any buffered audio and video. You must reset the framesync after manipulating the horizontal and vertical offset in order re-establish correct audio and video co-timing.

Display Submenu

Menu Structure

Parameter Type

Disp

H/V

Display Orientation

 

BRGT

Display Brightness

Display Orientation

This parameter lets you change the orientation of the display. “Vert” makes the characters look correct when the cards are mounted in a 2 RU frame like the 8310. “Horz” makes the characters look right in a horizontal frame.

Display Brightness

This parameter allows you to set the standard output brightness of the menu display. It is a percentage of maximum brightness.

Preset Submenu

MENU STRUCTURE

Parameter Type

Prst

Slct

Select Preset

 

Save

Save Settings

 

Load

Load Settings

 

Fact

Restore Factory Settings

Select Preset

Select from one of the five saved presets.

Save Settings

In this parameter, move the toggle switch up to save the settings to the card persistent storage.

Load Settings

In this parameter, move the toggle switch up to load the saved settings and make them active.

Restore Factory Settings

In this parameter, move the toggle switch up to make the factory default settings active, and make the stored settings equal to the factory settings.

Information Submenu

Menu Structure

Parameter Type

Info

+POW

Positive Watts Consumed

 

-POW

Negative Watts Consumed

Page 14 of 24

9032 Owner’s Manual (V 2.0)

Image 14
Contents 9032-SD SD-OM VersionCobalt Digital Inc. All rights reserved CopyrightTrademarks Important Safety Instructions Important Regulatory and Safety NoticesSymbol Meanings Environmental Information Contents Word of Thanks IntroductionThis Chapter OverviewDocumentation Terms Functional Block DiagramSupported Audio and Video Formats Raster structure Frame RateUnpacking Installation and SetupStatic Discharge Rear Module Installation Optional Rear Module InstallationRear Module Available for 9032-SD Board Installation Software VersionCard Control and Status Menu StructureSelect Default Source SDI / Analog Proc PhaseSD Pedestal Setup Frame Sync EnableSelect Preset Video DelayReset Frame Sync Save SettingsSoftware Release Number Positive Watts ConsumedNegative Watts Consumed Software Build NumberDashBoard Control System Software Remote ControlUsing the Menus and Menu Descriptions Menu Format Description Card InfoFrame Sync PresetsMenu Format Description Video Proc Video SignalControls Technical Specifications Other ReferenceVideo Input Service Information Troubleshooting ChecklistWarranty and Repair Policy Case of ProblemsStandard Equipment Ordering InformationSD and Related Products Optional EquipmentVisit us at the Cobalt Digital Inc. website Contact UsContact Cobalt Digital Inc

9032-SD specifications

The Cobalt Networks 9032-SD is a robust solution in the realm of server management and access control, particularly valued for its versatility and reliability in a variety of technological environments. Its primary function revolves around providing secure, remote access to servers, particularly for IT administrators who require seamless management of multiple systems from a single location.

One of the most prominent features of the Cobalt 9032-SD is its advanced security protocols. It implements strong encryption standards to ensure that data transmitted over the network is protected from unauthorized access. This is particularly crucial in today's digital landscape, where data breaches are commonplace. The device also supports multifactor authentication, adding an extra layer of security by requiring users to provide two or more verification factors to gain access.

In terms of technology, the Cobalt 9032-SD is equipped with dual Gigabit Ethernet ports. This allows for redundant network connections, enhancing reliability and ensuring that if one connection fails, the other can take over without interruption. The system's high availability design minimizes downtime, making it an excellent choice for mission-critical environments.

Another notable characteristic of the Cobalt 9032-SD is its user-friendly interface. Admins can easily navigate through the setup and configuration processes via a web-based management console. This intuitive design streamlines the process of managing server connections, simplifying what can often be a complex and time-consuming task.

In addition, the device also features remote KVM (Keyboard, Video, Mouse) capabilities, which enable users to control servers as if they were directly in front of them, regardless of their physical location. This remote functionality is especially beneficial for administrators managing multiple servers across different geographical locations.

The Cobalt Networks 9032-SD is also built with scalability in mind. It allows users to connect multiple servers simultaneously, making it suitable for both small businesses and larger enterprises with extensive server farms.

With its combination of security, reliability, user-friendly design, and scalability, the Cobalt Networks 9032-SD stands out as an essential tool for IT professionals looking to enhance their server management capabilities. It delivers on the promise of creating a more efficient, secure, and integrated approach to remote server administration.