Cobalt Networks 9032-SD owner manual Technical Specifications

Page 19

Technical Specifications

Table 4. Card - Technical Specifications

Category

Parameter

Specification

 

 

 

 

Number of Inputs

3

 

 

 

 

Input Type

Differential, Common Mode Rejection (5V AC)

 

 

 

 

Video Inputs

SD: Composite, Component YPbPr (BetaCam™,

 

 

MII™, SMPTE/N10), RGB, and Y/C

 

Conversion Bit Depth

12-Bits

 

 

 

Analog Video

SD Color Separation

5-Line Adaptive Comb or Notch Filter

 

 

Frequency Response

SD: Y- 0-30MHz ± 0.25db PbPr 0-15 MHz ±

Input

 

 

Differential Phase

SD: < ±0.4° typical

 

 

 

 

 

Differential Gain

SD: < ±0.4% typical

 

 

 

 

Noise

< -64dB (Luma Flat Field)

 

 

< -61dB (Luma Ramp)

 

 

 

 

Analog Front End Crosstalk

Within Noise Floor Measurement

 

 

 

 

Return Loss

> 20dB to 30MHz

 

 

 

Category

Parameter

Specification

 

 

 

 

Number of Outputs

2:SD-SDI BNC per IEC 60169-8 Amendment 2

 

 

 

 

Impedance

75Ω

 

 

 

Serial Digital

Return Loss

> 15 dB at 5MHz – 270MHz

 

 

Signal Level

800 mV ±10%

Video Outputs

 

 

DC Offset

0 Volts ±50 mV

 

 

 

 

 

Jitter

SD: <0.06UI (all outputs)

 

 

 

 

Overshoot

<0.2% of amplitude

 

 

 

9032 Owner’s Manual (V 2.0)

Page 19 of 24

Image 19
Contents SD-OM Version 9032-SDTrademarks CopyrightCobalt Digital Inc. All rights reserved Symbol Meanings Important Regulatory and Safety NoticesImportant Safety Instructions Environmental Information Contents Overview IntroductionThis Chapter Word of ThanksRaster structure Frame Rate Functional Block DiagramSupported Audio and Video Formats Documentation TermsStatic Discharge Installation and SetupUnpacking Rear Module Installation Rear Module Installation OptionalRear Module Available for 9032-SD Software Version Board InstallationMenu Structure Card Control and StatusFrame Sync Enable Proc PhaseSD Pedestal Setup Select Default Source SDI / AnalogSave Settings Video DelayReset Frame Sync Select PresetSoftware Build Number Positive Watts ConsumedNegative Watts Consumed Software Release NumberMenu Format Description Card Info Remote ControlUsing the Menus and Menu Descriptions DashBoard Control System SoftwareMenu Format Description PresetsFrame Sync Controls Video SignalVideo Proc Technical Specifications Video Input ReferenceOther Troubleshooting Checklist Service InformationCase of Problems Warranty and Repair PolicyOptional Equipment Ordering InformationSD and Related Products Standard EquipmentContact Cobalt Digital Inc Contact UsVisit us at the Cobalt Digital Inc. website

9032-SD specifications

The Cobalt Networks 9032-SD is a robust solution in the realm of server management and access control, particularly valued for its versatility and reliability in a variety of technological environments. Its primary function revolves around providing secure, remote access to servers, particularly for IT administrators who require seamless management of multiple systems from a single location.

One of the most prominent features of the Cobalt 9032-SD is its advanced security protocols. It implements strong encryption standards to ensure that data transmitted over the network is protected from unauthorized access. This is particularly crucial in today's digital landscape, where data breaches are commonplace. The device also supports multifactor authentication, adding an extra layer of security by requiring users to provide two or more verification factors to gain access.

In terms of technology, the Cobalt 9032-SD is equipped with dual Gigabit Ethernet ports. This allows for redundant network connections, enhancing reliability and ensuring that if one connection fails, the other can take over without interruption. The system's high availability design minimizes downtime, making it an excellent choice for mission-critical environments.

Another notable characteristic of the Cobalt 9032-SD is its user-friendly interface. Admins can easily navigate through the setup and configuration processes via a web-based management console. This intuitive design streamlines the process of managing server connections, simplifying what can often be a complex and time-consuming task.

In addition, the device also features remote KVM (Keyboard, Video, Mouse) capabilities, which enable users to control servers as if they were directly in front of them, regardless of their physical location. This remote functionality is especially beneficial for administrators managing multiple servers across different geographical locations.

The Cobalt Networks 9032-SD is also built with scalability in mind. It allows users to connect multiple servers simultaneously, making it suitable for both small businesses and larger enterprises with extensive server farms.

With its combination of security, reliability, user-friendly design, and scalability, the Cobalt Networks 9032-SD stands out as an essential tool for IT professionals looking to enhance their server management capabilities. It delivers on the promise of creating a more efficient, secure, and integrated approach to remote server administration.