Cobalt Networks 9033-SD owner manual Rear Module Installation Optional

Page 11

Rear Module Installation (Optional)

If you are installing the card in a 8310-C-BNC or 8310-BNC frame (one with a 100 BNC rear module installed across the entire back plane), skip this section.

If you are installing the card into a slot with no rear module, you should have ordered and received a 8310-RM-10 Rear Module with your card. You will need to install it in your 8310 frame before you can connect cables.

Use the following steps to install the 8310-RM-10 in an 8310 openGearTM frame:

1.Refer to the openGearTM 8310 frame Owner’s Manual, to ensure that the frame is properly installed according to instructions.

2.On the rear of the 8310, locate the card frame slot.

3.As shown in Figure 2, seat the bottom of the 8310-RM-10 in the seating slot at the base of the frame’s back plane.

Figure 2. Rear Module Installation

4.Align the top hole of the 8310-RM-10 with the screw hole on the top edge of the 8310 back plane.

5.Using a Phillips driver and the supplied screw, fasten the 8310-RM-10 panel to the 8310 back plane. Do not over tighten.

This completes the procedure for installing the 8310-RM-10 in an 8310 openGearTM frame.

9033-SD Owner’s Manual (V 1.1)

Page 11 of 26

Image 11
Contents SD-OM Version 9033-SDCobalt Digital Inc. All rights reserved CopyrightImportant Regulatory and Safety Notices Environmental Information Contents Overview IntroductionThis Chapter Word of ThanksOutputs Functional Block DiagramInput Raster structure Frame Rate Supported Audio and Video FormatsDocumentation Terms AES Audio Input Advanced FeaturesUnpacking Installation and SetupStatic Discharge Rear Module Installation Rear Module Installation OptionalCable Connections Board InstallationMenu Structure Card Control and StatusOutput Gain Proc PhaseEmbedded Group Enable Output SourceRestore Factory Settings Select PresetSave Settings Load SettingsSoftware Build Number Positive Watts ConsumedNegative Watts Consumed Software Release NumberDashBoard Control System Software Remote ControlUsing the Menus and Menu Descriptions Menu Format Description Tone PresetsEmbedded Audio Group GroupsVideo Proc Video SignalControls AES InputTechnical Specifications Other Analog AudioTroubleshooting Checklist Service InformationCase of Problems Warranty and Repair PolicyOptional Equipment Ordering InformationSD and Related Products Standard EquipmentPage Visit us at the Cobalt Digital Inc. website Contact UsContact Cobalt Digital Inc

9033-SD specifications

Cobalt Networks 9033-SD is a powerful device designed for modern networking and security needs. It operates at the intersection of high-performance hardware and advanced software capabilities, making it an essential asset for organizations looking to enhance their network infrastructure.

One of the standout features of the 9033-SD is its robust processing power. Equipped with a multi-core CPU, it ensures efficient handling of extensive data traffic, making it suitable for both small businesses and large enterprises. This processing capability allows for seamless multitasking, enabling the device to manage multiple connections and tasks simultaneously without any noticeable lag.

The networking capabilities of the 9033-SD are impressive, featuring support for various connectivity options, including Ethernet and wireless standards. This versatility allows organizations to integrate it into diverse network environments, ensuring compatibility with existing infrastructure and facilitating smooth communication between devices.

Security is a crucial aspect of the 9033-SD. With built-in robust security features, it offers advanced encryption protocols to safeguard data during transmission. This makes it ideal for organizations that handle sensitive information, ensuring compliance with industry standards and protecting against potential cyber threats.

Moreover, the 9033-SD supports various networking technologies, including VLAN, VPN, and traffic shaping. These features enhance network management, allowing administrators to create segmented networks, secure remote access, and optimize bandwidth utilization. As a result, organizations can improve overall network performance and ensure a seamless experience for users.

The device is designed with scalability in mind. As organizations grow, the 9033-SD can easily adapt to increasing demands by adding more users and devices without compromising performance. Its modular design allows for easy upgrades, which is essential for future-proofing an organization’s network infrastructure.

User management is another noteworthy feature of the 9033-SD. With an intuitive interface, administrators can easily monitor and manage user access. This capability is vital for enforcing policies, ensuring that only authorized personnel can access sensitive parts of the network.

In conclusion, Cobalt Networks 9033-SD is a highly versatile and powerful networking device that addresses the needs of modern organizations. With its blend of performance, security, and scalability, it stands out as an excellent choice for businesses aiming to enhance their network capabilities and maintain a secure digital environment.