Cobalt Networks 9033-SD owner manual Board Installation, Cable Connections

Page 12

Board Installation

Use the following steps to install the card in the openGearTM 8310 frame:

1. Refer to the Owner’s Manual of the openGearTM 8310 frame to ensure that the frame

 

 

is properly installed according to instructions.

 

 

 

 

 

 

Heat and power distribution requirements within a frame may dictate

 

 

 

specific slot placement of cards. Cards with many heat-producing

 

 

 

components should be arranged to avoid areas of excess heat build-up,

 

Warning

 

particularly in frames using convection cooling.

 

 

 

 

 

 

2. After selecting the desired frame installation slot, hold the card by the edges and

 

 

carefully align the card edges with the slots in the frame. Then, fully insert the card

 

 

into the frame until the rear connection plugs are properly seated on the midplane and

 

 

rear modules.

 

This completes the procedure for installing the card in the openGearTM 8310 frame.

Cable Connections

This section provides instructions for connecting cables to the installed BNC rear modules on the 8310 series frame backplane. Connect the input and output cables according to the following diagram. The input is internally terminated with 75 Ohms. It is not necessary to terminate unused outputs.

SD-SDI Input

Pr/C

AES IN/OUT 1

AES IN/OUT 3

SD SDI Output 1

1 2

3 4

5 6

78

910

Y/CMPST

Pb

AES IN/OUT 2

AES IN/OUT 4

SD SDI Output 2

Figure 3. BNC Designations for the Card Rear Module 8310-RM-10 or 8310-RM-100

In the near future, Cobalt Digital Inc. will release a series of rear modules that allow access to the full IO capabilities of the card.

Page 12 of 26

9033-SD Owner’s Manual (V 1.1)

Image 12
Contents 9033-SD SD-OM VersionCopyright Cobalt Digital Inc. All rights reservedImportant Regulatory and Safety Notices Environmental Information Contents Introduction This ChapterWord of Thanks OverviewFunctional Block Diagram InputOutputs Supported Audio and Video Formats Raster structure Frame RateAES Audio Input Advanced Features Documentation TermsInstallation and Setup Static DischargeUnpacking Rear Module Installation Optional Rear Module InstallationBoard Installation Cable ConnectionsCard Control and Status Menu StructureProc Phase Embedded Group EnableOutput Source Output GainSelect Preset Save SettingsLoad Settings Restore Factory SettingsPositive Watts Consumed Negative Watts ConsumedSoftware Release Number Software Build NumberRemote Control Using the Menus and Menu DescriptionsDashBoard Control System Software Presets EmbeddedAudio Group Groups Menu Format Description ToneVideo Signal ControlsAES Input Video ProcTechnical Specifications Analog Audio OtherService Information Troubleshooting ChecklistWarranty and Repair Policy Case of ProblemsOrdering Information SD and Related ProductsStandard Equipment Optional EquipmentPage Contact Us Contact Cobalt Digital IncVisit us at the Cobalt Digital Inc. website

9033-SD specifications

Cobalt Networks 9033-SD is a powerful device designed for modern networking and security needs. It operates at the intersection of high-performance hardware and advanced software capabilities, making it an essential asset for organizations looking to enhance their network infrastructure.

One of the standout features of the 9033-SD is its robust processing power. Equipped with a multi-core CPU, it ensures efficient handling of extensive data traffic, making it suitable for both small businesses and large enterprises. This processing capability allows for seamless multitasking, enabling the device to manage multiple connections and tasks simultaneously without any noticeable lag.

The networking capabilities of the 9033-SD are impressive, featuring support for various connectivity options, including Ethernet and wireless standards. This versatility allows organizations to integrate it into diverse network environments, ensuring compatibility with existing infrastructure and facilitating smooth communication between devices.

Security is a crucial aspect of the 9033-SD. With built-in robust security features, it offers advanced encryption protocols to safeguard data during transmission. This makes it ideal for organizations that handle sensitive information, ensuring compliance with industry standards and protecting against potential cyber threats.

Moreover, the 9033-SD supports various networking technologies, including VLAN, VPN, and traffic shaping. These features enhance network management, allowing administrators to create segmented networks, secure remote access, and optimize bandwidth utilization. As a result, organizations can improve overall network performance and ensure a seamless experience for users.

The device is designed with scalability in mind. As organizations grow, the 9033-SD can easily adapt to increasing demands by adding more users and devices without compromising performance. Its modular design allows for easy upgrades, which is essential for future-proofing an organization’s network infrastructure.

User management is another noteworthy feature of the 9033-SD. With an intuitive interface, administrators can easily monitor and manage user access. This capability is vital for enforcing policies, ensuring that only authorized personnel can access sensitive parts of the network.

In conclusion, Cobalt Networks 9033-SD is a highly versatile and powerful networking device that addresses the needs of modern organizations. With its blend of performance, security, and scalability, it stands out as an excellent choice for businesses aiming to enhance their network capabilities and maintain a secure digital environment.