Remote Control
In This Chapter
This section provides a detailed explanation on using remote control functions with your card.
DashBoard Control System Software
The DashBoard Control System enables you to monitor and control openGearTM frames and controller cards from a computer. The DashBoard software and manual can be downloaded from the Cobalt Digital Inc. website (www.cobaltdigital.com).
Using the Menus and Menu Descriptions
You must first install the DashBoard Control System software on your computer. Refer to the DashBoard User Manual for software installation procedures and for using the DashBoard interface.
The following pages list the parameters from the menu tabs available in the DashBoard software when connected to a 9011.
Menu | Item | Format | Description |
|
|
|
|
| Product | The product name | |
|
|
|
|
| Manufacturer | Cobalt Digital Inc. | The manufacturer of the |
|
| product | |
|
|
| |
| Serial Number | ############ | The product serial number |
|
|
|
|
| Software Release | ### | The release number of the |
| Number |
| firmware in this card |
| PIC Software Build | ## | The internal build number |
Card Info | Number |
| of this software |
| Temperature | Degrees C / Degrees F | The surface temp of the |
|
|
| board |
| +12 V Power Rail | #.## W | Positive Supply Power |
|
|
|
|
| #.## W | Negative Supply Power | |
|
|
|
|
| Power | #.# W | Total power consumed by |
| the board | ||
|
|
| |
| Input Signal | ############ | Detected standard of the |
| input signal. | ||
|
|
|
9011 Owner’s Manual • (V 1.0) | Page 16 of 22 |