1.1 Introduction
Advantech’s ADAM-4562 allows PC users to connect their serial devices to systems that use USB interface. By attaching the ADAM-4562 to a PC, it will no longer be necessary to open the chassis or turn off the PC to install the hub. With the ADAM-4562, the user instantly gets one extra high-speed RS-232 ports which is the Full Modem control signals. In addition, since the power is derived from the USB port, there are not any cumbersome power adapters. This makes the ADAM-4562 especially suitable for printers, POS system and industrial control devices.
Compliant with USB v1.1, the ADAM-4562 features a lot of powerful functions such as high-speed 115.2 Kbps, support for various operating systems and Full Modem control signal. By simply plugging in a USB hub, the ADAM-4562 eliminates configuration issues associated with expensive, antiquated card solutions. This eliminates the need to remove the PC cover and or to reboot the operating system during installation. The user only installs the driver, and follows the on-screen instructions. This reduces a lot of programming time.
The USB interface, now standard on virtually all new PCs, offers significant advantages over earlier bus types. A signal USB interface can connect up to 127 devices at data rates up to 12 Mbps. This kind of easy and convenient connectivity means that your network can grow with your needs.
1.2 Features
zOutput type: Full compliance with USB v1.1specifications
zTransmission speed up to 115.2Kbps
zFull-duplex transmitter (TX) and receiver (RX);
Six Modem control pins RTS, CTS, DTR, DSR, DCD, and RI)
zIsolation protection 2,500 Vdc provided
zNo external power supply necessary; the ADAM-4562 derives its power from the USB port
zPlug-and play installation
zHot swap function supported
zDrivers for Windows 98/2000/XP
2