Guide to installation and operation | XVC-1001-DC |
Film-Based and Pixel-Based Content
In order to perform the best scaling, the XVC-1001-DC has to detect the presence of film-based content in video signals, and the presence of video (pixel based) content over film-based content.
Film Sequence Detection
Film sequences are transfered to video using various pulldown cadences. The film to video transfer may create artifacts in the image. The Film Sequence Detection function sets the XVC-1001-DC to detect the presence of film-based content in the video, to detect specific pulldown cadences and with this information, to recreate the original image sequences. The video is then downscaled with great, artifacts free results.
Select from:
•Off
•2:2 only
•3:2 only
•5:5 only
•2:2 and 3:2
•2:2 and 5:5
•3:2 and 5:5
•auto
Off: The XVC-1001-DC does not look for film-based content in the video, and de-interlaces and scales the video as if the content was only video- based.
2:2, 3:2, 5:5, 2:2 and 3:2, 2:2 and 5:5, 3:2 and 5:5: Sets the XVC- 1001-DC to look specifically for the selected pulldown cadences while ignoring the others.
Auto: Sets the XVC-1001-DC to automatically look for fim-based content of any pulldown cadence it can find, within the cadences present in the drop down menu.
