Algolith XVC-1001-DC operation manual Power Consumption, Card’s Identification

Page 8

	XVC-1001-DC	Guide to installation and operation

Power Consumption

The power rating of the openGear frame allows 125 watts to be redistributed over 10 slots. A single slot may exceed 12 watts but the overall power consumption shall not be above 125 watts.

The XVC-1001-DC dissipate 14 watts.

An openGear frame, when populated with Algogear cards only (VNR-1000-SD, VNR-1000-HD, XVC-1001-UC, FRS-1002-MD...), shall use no more than 8 slots.

Blank slot fillers can be used to block slots in an openGear frame. Contact Algolith if you wish to get blank slot fillers for your openGear frame. A warning message is affixed to the XVC-1001-DC card and other Algogear cards to ensure the user is aware of the card’s power consumption when installing new systems, or rearranging frame configurations.

openGear frame Blocked frame slot XVC Cards

ALGOGEAR

ALGOGEAR

DO NOT REMOVE

ALGOGEAR

Card’s Identification

The XVC-1001-DC card is identified with a product label located near the card’s front edge. When installed in a frame and powered, the card displays the product name on a dot matrix display. See drawing below.

Card status (DS1)

Input 1 status (DS2) Not used on XVC-1001-DC (DS3) Not used on XVC-1001-DC (DS4) Not used on XVC-1001-DC (DS5)

Card reference status (DS6)

ALGOGEAR

XVC-1001-DC

XVC1001D

Dot matrix display

Product label

8

Image 8

Contents HD to SD Downconverter Table of Contents Safety Introduction Installation and setupHow to Repurpose your Card Speciﬁ cations Limited Warranty Contact usRestrictions on Hazardous Substances Electromagnetic CompatibilityMain Features OverviewAlgogear Series Card IdentificationBoard Installation Static DischargeXVC-1001-DC card is installed in the openGear frame Power Consumption Card’s IdentificationRear Input / Output Module Labels XVC-1001-DCOutput Channels Dashboard Software Interface Basic Tree View Window Product Status AreaCard Info Window Card Status WindowCard License Window ControlAdjusting Parameters Administrator LevelAdmin Login Admin LogoutChannel 1 Settings Card Setup WindowSave Settings Destination Selecting the Reference Reference SelectionOpenGear Frame XVC-1001-DC rear module Output Video Format Video Setup WindowOutput Video Delay Mode Output Video Delay Custom frame Output Video Delay Custom lineAspect Ratio Output Aspect Ratio SettingsAspect Ratio Input Aspect Ratio Output H Custom Aspect Ratio Output V CustomXVC-1001-DC Film-Based and Pixel-Based Content Film Sequence DetectionBackground Fill Mode De-Interlacing Pixel-BasedAudio Setup Window Audio Output ModeAlarm Setup Window How to Repurpose your Algogear Card Load the new product onto your card Algolith extClick Upload to get to the .BIN file Card is in the process of being repurposed Dot matrix display Guide to installation and operation Aspect Ratio De-InterlacingDownconverter Speciﬁ cations InputsLimited Warranty Coverage Algolith IncVia Internet Visit us atGuide to installation and operation