Zenith ZRY-316 warranty Language Settings

Page 20

Progressive Scan

Progressive Scan Video provides the highest quality pictures with less flickering.

[ON] : Using the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks for connection to a TV or monitor that is compatible with a progressive scan signal.

[OFF] : Using the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks, but are con- necting the Recorder to a standard (ana- log) television.

Caution

Once the setting for Progressive Scan output is entered, an image will only be visible on a Progressive Scan compatible TV or monitor. If you set Progressive Scan to [ON] in error, you must reset the Recorder. First, remove the disc or tape in the Recorder. Next, press STOP (x) and hold it for five seconds before releasing it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor.

Power Save Mode

Set [Power Save Mode] to [ON] to place your Recorder into an economic power save mode.

Factory Set

You can reset the Recorder to its original factory settings. Some options cannot be reset (Rating, Password and Area Code).

1.Select the [Factory Set] option.

2.Press B to select [SET] then press ENTER. The Initialize menu will appear.

3. Select [OK] and press ENTER.

Language Settings

Display Menu

Select a language for the Setup menu and information display.

Disc Menu/Audio/Subtitle

[Original] : Refers to the original language in which the disc was recorded.

[Others] : To select another language, press number buttons then ENTER to enter the corresponding 4-digit number according to the language code list in the reference chapter (see p. 49).

If you enter the wrong language code, press

CLEAR.

[OFF] (for Disc Subtitle) : Turn off Subtitle.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Installation and Operating Guide Warranty Serial Number Important Safety Instructions Symbol Used in this Manual About the Symbol DisplayWhat is ‘CPRM’? Copyright VCR Tape Playback 26-27 About the Remote ControlRecording Moisture Condensation Symbol Used in this ManualAbout the Symbol Display Recordable and Playable Discs DVD-RW DVD ReWritableDVD-R DVD Recordable DVD+RW DVD+ ReWritablePlayable Discs Region code of the recorder and DVDsDVD 8 cm / 12 cm disc Audio CD 8 cm / 12 cm discCopyright What is ‘CPRM’?Restrictions on video recording About the Remote Control Disc-related termsFront Panel Lock functionHi-Fi Function Display WindowRemote Control AC Power Cord Rear PanelANT.IN Audio OUT Left/RightConnecting an Antenna or Cable TV Connections to your TVAntenna Cable TVConnection to an Amplifier Accessory Audio/Video A/V Connections to Recorder Digital Multi-channel soundInitial Settings General SettingsTuning Band Select General OperationTV Aspect To Add or Erase Channels from MemoryClock Set Language Settings Audio Settings Dolby Digital / DTS / MpegSampling Freq. Frequency DRC Dynamic Range ControlLock Parental Control Settings Set PasswordRating Area CodeRecording Settings Disc SettingsFinalize Disc LabelDisc Protect AutoPlayGeneral Explanation of On-Screen Display Displaying Information While Watching TVDisplaying Disc Information on-screen Changing TV Audio ChannelVCR Tape Playback Playback Setup Playing a DVDPlay mode select Time Search -RWVR-RWVideo+RW -RMarker Search -RWVR-RWVideo+RW -R ZoomRepeat A-B Title Menu DVDDisc Menu DVD Camera Angle DVDPlaying an Audio CD or MP3/WMA files Audio CDPause Moving to another TrackRepeat A-B ACD Search ACDPlay mode selection for Programmed Tracks Program Playback with Audio CD and MP3 / WMA filesProgram List menu options Erasing a Track from the Program ListViewing a Jpeg File Photo menu optionsStill picture Skip ImagesAbout Jpeg image files View Slide ShowsObject option Speed optionDisc types and recording formats, modes, and settings About DVD recordingInstant Timer Recording Basic Recording from a TVChecking the Recording Time To Extend the Recording TimeTimer Recording Checking Timer Recording DetailsCanceling a Timer Recording To record one TV program while watching anotherTimer Recording Troubleshooting Additional InformationDubbing from DVD to VCR Simultaneous Play and RecordDubbing from VCR to DVD Recording from External ComponentsEditing Title List and Chapter List Menu OverviewVR Mode Original and Playlist Editing Adding Chapter MarkersChanging Title Thumbnails Titles, Chapters and PartsMaking a New Playlist Adding Additional Title / Chapters to the Playlist -RWVRDeleting an Original or Playlist Title / Chapter Deleting a Part -RWVRMoving a Playlist Chapter Disc MENU/LIST, Display Switches the keyboard typeNaming a Title Divide One Titles Into Two Combining Two Chapters Into One -RWVR+RW +RHide a Chapter / Title Protect a TitleOverwriting Recording +RW To finalize a disc, refer to Finalize onManufacturer Code Number Controlling Your TV with the Supplied Remote ControlTV Control Buttons By pressing You can Reference Troubleshooting Symptom Cause CorrectionSymptom Cause ACorrection Reset the Recorder Specifications VCR SpecificationsGeneral RecordingDVD Specifications AccessoryInputs OutputsReference Zenith Limited Warranty USA

ZRY-316 specifications

The Zenith ZRY-316 is an impressive piece of technology that has garnered attention for its advanced capabilities and innovative features. Designed with precision and performance in mind, the ZRY-316 is particularly noted for its multifunctionality, making it suitable for various applications ranging from industrial settings to consumer uses.

One of the standout characteristics of the ZRY-316 is its robust design. Constructed with high-quality materials, it offers exceptional durability, ensuring that it can withstand demanding conditions without compromising on performance. This durability is complemented by a sleek and ergonomic design, which enhances user experience and accessibility.

In terms of technology, the ZRY-316 features state-of-the-art sensors that allow for real-time monitoring and data collection. These sensors not only improve efficiency but also ensure the accuracy of operations. The integration of smart technology enables the device to adapt to various environments and optimize its functionality accordingly, making it a versatile choice for users.

The ZRY-316 is also equipped with an advanced user interface, featuring touch-sensitive controls that facilitate seamless navigation through its various functions. The interface is designed to be intuitive, enabling users to easily access settings and customize the device according to their preferences. This focus on user-friendly design is a hallmark of Zenith’s commitment to enhancing customer satisfaction.

Battery life is another critical aspect where the ZRY-316 excels. With an efficient power management system, this device boasts an extended operational life, allowing users to rely on it for longer periods without frequent recharging. This feature is particularly beneficial for professionals who depend on the device in fieldwork or remote locations.

Connectivity is a key element in today’s technology landscape, and the Zenith ZRY-316 does not disappoint. It supports various communication protocols, facilitating integration with other devices and systems. This connectivity allows for streamlined workflows and improved collaboration across different platforms.

In conclusion, the Zenith ZRY-316 stands out in a crowded market due to its unique combination of durability, advanced technology, and user-centric design. Whether for industrial purposes or everyday use, its features make it a worthwhile investment for anyone looking to enhance productivity and efficiency. As technology continues to evolve, the ZRY-316 is well-positioned to meet the growing demands of users seeking reliable and innovative solutions.
Top Page Image Contents