Zenith Z44SZ80, Z52SZ80 warranty Channel Label Setup, Main Picture Source Selection

Operation

Channel Label Setup

-Choose preset labels for your channels.

-If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a DTV chan- nel - even if you didn't preset a label for the channel.

1.Press the MENU button and then use D / E button to select the SETUP menu.

2.Press the G button and then use D / E button to select Channel Label.

3.Press the G button. You will now see a screen filled with Labels and a preview screen.

4.Use the CH D / E button to select a channel to Label.

5.Use D / E / F / G button to select the appropriate label for the channel, then press ENTER button to set the Label to the selected channel.

- If you press ENTER button in TV viewing mode, you will see the channel banner.

CADTV 27-1

Dolby Digital HD

CNN

Main Picture Source Selection

-Changes the picture source so you can watch your off-air TV, cable TV, VCR, DVD, or any other devices that are connected to your TV.

1.Press the MENU button and then use D / E button to select the SETUP menu.

2.Press the G button and then use D / E button to select Main Input.

3.Press the G button and then use D / E button to select the source: Antenna, Cable, Video1, Video2, Front Video, Component1, Component2, RGB-DTV (or RGB-PC), HDMI1/DVI or HDMI2.

4.Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.

Input Label

1.Press the MENU button and then use D / E button to select the SETUP menu.

2.Press the G button and then use D / E button to select Input Label.

3.Press the G button and then use D / E button to select the source: Video1, Video2, Front Video, Component1, Component2, RGB, HDMI1/DVI or HDMI2.

4.Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.

Owner’s Manual 23