Zenith XBR716 warranty Playback, Playing a Tape, Playing a DVD

Playback

Playing a Tape

1.Press VCR to control the VCR deck.

2.Insert a pre-recorded video cassette.

•If the unit is powered off, it will power on automatically when the tape is loaded.

•If the Timer indicator lights on the front panel display window, press POWER once.

3.Press PLAY (N) to start playback.

•If a tape without a safety tab is inserted the unit starts playback automatically.

4.Press STOP (x) to stop playback.

•If the tape reaches the end before you press STOP (x) the Recorder automatically stops, rewinds and ejects the tape.

Note:

S-VHS Quasi Playback (SQPB)

•This Recorder can play back S-VHS recorded tapes, however, it cannot make recordings using S-VHS format tapes.

•SQPB is an abbreviation for S-VHS Quasi Playback.

Playing a DVD

1.Press DVD to control the DVD deck.

2.Press EJECT, OPEN/CLOSE (Z) to open the disc tray. Load your chosen disc in the tray, with the playback side down.

3.Press EJECT, OPEN/CLOSE (Z) to close the tray. Playback starts automatically. If playback does not start, press PLAY (N) or Starts play- back using HOME menu.

4.To stop the playback, press STOP (x).

The unit records the stopped point, depending on the disc. “Xx” appears on the screen briefly. Press PLAY (N) to resume playback (from the scene point). If you press STOP (x) again or unload the disc (“x” appears on the screen.), the unit will clear the stopped point.

5.Press EJECT, OPEN/CLOSE (Z) to remove the disc.

Press EJECT, OPEN/CLOSE (Z) to close disc tray or press POWER (1), the disc tray closes automatically and unit turns off.

Note:

If parental control is set and the disc is not within the rating settings you must input the password.

(See [Rating] on page 18).

22