Zenith XBR716 warranty Divide One Title Into Two, Combining Two Chapters Into One -RWVR+RW +R

Divide One Title Into Two

+RW

Use this command to split a title up into two new titles.

1.On the Title List menu, select a title you want to divide then press ENTER.

The menu options appears on the left side of the screen.

2.Select [Edit] > [Divide] option. Example: Title List (DVD+RW)

3.Press ENTER.

[Edit (Divide)] menu appears.

Current picture

The first title’s thumbnail

The second title’s thumbnail

4.Use play, pause step, search and slow-motion to find the point you want to divide the title.

5.Select [Divide] option then press ENTER at the point.

To reset the point, select [Cancel] option then press ENTER. Repeat from step 3.

6.Choose [Done] option then press ENTER to fix the dividing point.

The title is divided into two new titles. It take up to 4 minutes to divide.

Note:

The diving point may not be selected if the point is less than 3 seconds long.

Combining Two Chapters

Into One -RWVR+RW +R

Use this function to combine two adjacent chapters into one.

1.On the Chapter List menu, select the second chapter of the two chapters you want to combine then press ENTER

The menu options appears on the left side of the screen.

2.Use v / V to select [Combine] option.

The combine indicator appears between the two chapters you want to combine.

Example: Title List (DVD-VR)

3.Repeat steps 1 - 2 to continue to combine from the menu.

4.Press RETURN (O) repeatedly to exit the menu.

Notes:

This function cannot operate listed as below;

•If there is only one chapter within the title.

•If you select first chapter.

•If two chapters created by erasing a part from an original title.

•If two chapters created from different titles.

•If two chapters created by moving an order from an original title.

EDITING

41