Zenith DVD-2220 warranty Precautions, Use a soft, dry cloth for cleaning

Page 6

PAGE 6

INTRODUCTION

Precautions

Notes on handling

Notes on Moisture Condensation

When shipping the DVD player, always use the original shipping carton and packing materials.

For maximum protection, repack the unit as it was originally packed at the factory.

Do not use volatile liquids, such as insect spray, near the DVD player. Do not leave rubber or plastic products in contact with the DVD player for a long time. They will leave marks on the finish.

The top and rear panels of the DVD player may become warm after a long period of use. This is normal and not a malfunction.

When the DVD player is not in use, be sure to remove the disc and turn off the power.

If you do not use the DVD player for a long period, the unit may not function properly in the future. Turn on and use the DVD player occasionally.

Notes on Locating

When you place this DVD player near a TV, radio, or VCR, the playback picture may become poor and the sound may be distorted. In this case, move the DVD player away from the TV, radio, or VCR.

Notes on Cleaning

Use a soft, dry cloth for cleaning.

For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to wipe it dry. Do not use any type of solvent, such as thinner and benzine, as they may damage the surface of the DVD player.

If you use a chemical saturated cloth to clean the unit, follow that product’s instructions.

Warning: Cleaning and adjustment of lenses and/or other components of playback mechanism should be performed by a qualified service technician.

To Obtain a Clear Picture

The DVD player is a high technology, precision device. If the optical pick-up lens and disc drive parts are dirty or worn down, the picture quality becomes poor. To obtain a clear picture, we recommend regular inspection and maintenance (cleaning or parts replacement) every 1,000 hours of use depending on the operating environment. For details, contact your nearest dealer.

Moisture condensation damages the DVD player. Please read the following carefully.

Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops of water form on the outside of the glass. In the same way, moisture may condense on the opti- cal pick-up lens inside this unit, one of the most cru- cial internal parts of the DVD player.

 

 

ples

o

f moi

st

 

 

 

am

 

 

 

ur

 

x

 

 

 

 

 

e

E

 

ndensati

on

 

 

 

 

 

 

 

co

 

 

 

Optical

 

 

 

 

 

 

 

 

-up lens

 

 

 

 

 

 

 

 

pick

Moisture condensation occurs during the following cases.

When you bring the DVD player directly from a cold place to a warm place.

When you use the DVD player in a room where you just turned on the heater, or a place where the cold wind from the air conditioner directly hits the unit.

In summer, when you use the DVD player in a hot and humid place just after you move the unit from an air conditioned room.

When you use the DVD player in a humid place.

It's

too

!

 

warm

Do not use the DVD player when moisture condensation may occur.

If you use the DVD player in such a situation, it may damage discs and internal parts. Remove the disc, connect the power cord of the DVD player to the wall outlet, turn on the DVD player and leave it “ON” for two or three hours. After two or three hours, the DVD player will have warmed up and evaporated any moisture. Keep the DVD player connected to the wall outlet and moisture condensation will seldom occur.

Wait!

Image 6
Contents E r a t i n g g u i d e / w a r r a n t y Insert Safety PrecautionsTo Rain or Moisture FCC NoticeTable of Contents Power-Cord Protection Power SourcesCleaning Grounding or PolarizationHeadphones AccessoriesConnecting Sound Volume Damage Requiring ServicePrecautions Use a soft, dry cloth for cleaningMoisture condensation occurs during the following cases On Cleaning Discs On Handling DiscsOn Storing Discs Display Window Identification of ControlsFront Panel ArrowVideo OUT jack Power CordRear Panel Optical Digital Audio OUT jackIdentification of Controls con’d Controlling the TVs Open the battery cover Preparing the Remote ControlOperating with the Remote Control Insert batteries AAA sizeConnecting to a TV Connect the DVD player to your TVConnecting to an Audio System Dolby Digital AC-3 Connecting to Optional EquipmentEnjoying Dolby Digital AC-3 Sound To enjoy Dolby Digital AC-3 soundEnjoying Dolby Pro Logic Surround Sound Dolby Pro Logic SurroundEnjoying 2 Channel Digital Stereo Sound Enjoying DTS SoundConnection example Basic Playback Play of the selected item now begins When the unit is not in use, remove the disc and pressPower to turn off the power After operationStopping Play Still Picture PauseSkipping forward or back To Scan at fast forward or fast Reverse playback Playing at x2 Normal Speed or Scanning at High SpeedTo playback at 2 times Normal speed Playing Frame by FramePress Slow FV or VG during playback Playing in slow-motionResuming Playback from the same location Press ResumeGeneral Information about GUI menu icons Common procedures Press Display during playbackPress F/ G to select the desired setting Press D/E to select the desired itemDetailed description of each GUI menu icon NumericUsing a title menu/DVD menu Using a title MenuUsing a DVD Menu Press repeatedly Subtitle until Changing subtitle languagePress Subtitle during playback Desired language is selectedPress Audio repeatedly until Changing audio soundtrack languagePress Audio during play Desired sound is selectedViewing from another angle Producing a 3D Surround effectRepeat Play Repeating viewing listeningRepeating sections between two specific points A-B repeat Storing markers in memory to be viewed listened to again Zooming feature/Random play Program play Setup Selecting disc languages DVD only At the setup screenSelecting disc language DVD only Press D/E to select Disc Audio and pressSelecting rating level and password Selecting rating level and password DVD onlyTo clear your 4-digit password Selecting TV Aspect Setting is finished and the Setup screen is displayedSelecting TV Aspect Press D/ E to select TV Aspect and press GSelecting Menu Language Press G Selecting Digital Audio OutputPress D/ E to select Digital Audio Output Press D/ E to select the desired outputTable of Language and Their Abbreviations Code LanguagePlayable Discs Disc mark Contents Disc size Maximum playback timeDisc Requirements/Copyright Information Audio CDsBefore Calling Service Personnel Symptoms and CorrectionSymptom Cause Correction Specifications DVD player/Outputs/Supplied AccessoriesDVD player Outputs Supplied Accessories DBS Page Page Page Your Zenith Limited Warranty