StarTech.com VGANTSCPROGB, VGA2NTSCPRO manual Sharpness, Zoom, Panning

Page 6

Sharpness

There are eight sharpness levels available to choose from. To adjust the sharpness:

1.Press the Menu button to call up the OSD menu.

2.Use the +/- buttons to scroll to the Sharpness icon. Press the Select button to view the sharpness settings.

3.Use the +/- buttons to scroll through the sharpness settings until you reach your ideal sharpness level.

4.Push the Select button to save the sharpness level and press the Menu button to exit the sharpness function. You can also allow the converter to sit idle for a few seconds. This will save the sharpness setting and exit the OSD automatically.

Zoom

The VGA2NTSCPRO performs a 2X zoom in both horizontal and vertical directions. Using the zoom mode also involves selecting which quadrant of the screen you want to zoom in on.

1.Press the Menu button to call up the OSD menu.

2.Use the +/- buttons to scroll to the Zoom icon. Press the Select button to view the zoom settings mode.

3.Press Select to enter Zoom mode.

4.Use the +/- buttons to scroll between the four different quadrants of the screen. You can also press the Select button again to exit Zoom mode and return to normal mode.

5.Once you are happy with your zoom settings, allow the converter to sit idle for a few seconds. This will save the zoom settings and exit the OSD automatically.

Panning

The VGA2NTSCPRO allows you to pan across your image both vertically and horizontally.

1.Press the Menu button to call up the OSD menu.

2.Use the +/- buttons to scroll to the Panning icon. Press the Select button to view the panning settings.

3.A pair of small arrows will indicate whether you are in Vertical or Horizontal pan mode. Use the Select button to toggle between Vertical and Horizontal mode.

4.Depending on your mode, the + button will pan either up or right. The - button will pan either down or left.

5.Once you are happy with your panning settings, allow the converter to sit idle for a few seconds. This will save the panning settings and exit the OSD automatically.

Instruction Manual

3

Image 6
Contents VGA PC to TV Video Converter with Remote Control FCC Compliance Statement Table of Contents Packaging Contents IntroductionInstallation Using the On-Screen DisplaySharpness ZoomPanning Horizontal/Vertical Scaling PositioningBrightness Reset Using the RemoteColor Bar No video output Output on TV is mono black and whiteSpecifications WeightTechnical Support Warranty Information Limitation of Liability
Related manuals
Manual 6 pages 44.27 Kb