StarTech.com VGA2NTSCPRO, VGANTSCPROGB manual Horizontal/Vertical Scaling, Positioning, Brightness

Page 7

Horizontal/Vertical Scaling

The VGA2NTSCPRO allows horizontal and vertical scaling so that an image can be scaled to meet the visible part of your TV screen. If you are in Zoom mode, vertical scaling is disabled.

1.Press the Menu button to call up the OSD menu.

2.Use the +/- buttons to scroll to the H/V Scaling icon. Press the Select button to view the scaling settings.

3.A pair of small arrows will indicate whether you are in Vertical or Horizontal scale mode. Use the Select button to toggle between Vertical and Horizontal mode.

4.The + button will spread your screen out towards the edges. The - button will “tighten” or shrink the screen.

5.Once you are happy with your scaling settings, allow the converter to sit idle for a few seconds. This will save the scaling settings and exit the OSD automatically.

Positioning

The positioning function allows you to move your TV image both vertically and horizontally.

1.Press the Menu button to call up the OSD menu.

2.Use the +/- buttons to scroll to the Positioning icon. Press the Select button to view the positioning settings.

3.A pair of small arrows will indicate whether you are in Vertical or Horizontal positioning mode. Use the Select button to toggle between Vertical and Horizontal mode.

4.Depending on your mode, the + button will shift the display either up or right. The - button will shift the display either down or left.

5.Once you are happy with your position settings, allow the converter to sit idle for a few seconds. This will save the position settings and exit the OSD automatically.

Brightness

There are four brightness levels supported by the VGA2NTSCPRO.

1.Press the Menu button to call up the OSD menu.

2.Use the +/- buttons to scroll to the Brightness icon. Press the Select button to view the brightness settings.

3.Use the +/- buttons to set the desired brightness level.

4.Once you are happy with your brightness settings, allow the converter to sit idle for a few seconds. This will save the brightness settings and exit the OSD automatically.

Instruction Manual

4

Image 7
Contents VGA PC to TV Video Converter with Remote Control FCC Compliance Statement Table of Contents Introduction Packaging ContentsUsing the On-Screen Display InstallationZoom SharpnessPanning Positioning Horizontal/Vertical ScalingBrightness Using the Remote ResetColor Bar Output on TV is mono black and white No video outputWeight SpecificationsLimitation of Liability Technical Support Warranty Information
Related manuals
Manual 6 pages 44.27 Kb