Radio Shack DVD / VCR owner manual Display Setting, Audio Setting

BDISPLAY Setting

You can change the display functions. Follow steps 1) to 3) in the “CUSTOM Menu” section on page 20.

4 Select the desired item.
		or
DISPLAY menu
SETUP	DISPLAY
TV ASPECT		4:3 LETTER BOX
STILL MODE		AUTO
PROGRESSIVE		OFF

5TV ASPECT: QUICK

(Default: 4:3 LETTER BOX) See Hint on the right.

TV ASPECT	4:3 LETTERBOX	TV ASPECT
		4:3 LETTER BOX
STILL MODE	AUTO
		4:3 PAN & SCAN
PROGRESSIVE	OFF
		16:9 WIDE
	ENTER

STILL MODE: (Default: AUTO) See Hint on the right.

TV ASPECT	4:3 LETTERBOX	STILL MODE
		AUTO
STILL MODE	AUTO	FIELD
PROGRESSIVE	OFF	FRAME

ENTER

Select the desired setting.

ENTER

or

Select the desired setting.

ENTER

or

6To exit the menu

SETUP

Hint

TV ASPECT:

•Select “4:3 LETTER BOX”, so that black bars may appear on the top and bottom of the screen.

•Select “4:3 PAN & SCAN” for a full height picture with both sides adjusted.

•Select “16:9 WIDE” if a wide- screen TV is connected to this unit.

STILL MODE:

• Select “AUTO” usually.

• If you select “AUTO”, automat-

ically select the best resolution

setting (FRAME or FIELD)

based on the data characteris-

tics of the pictures (default).

• If you select “FIELD”, the

5 PROGRESSIVE:		If “PROGRESSIVE” is “ON”,
	QUICK
(Default: OFF)		this message appears:

picture in the still mode will

be stabilized.

• If you select “FRAME”, the

See Hint on the right.

	TV ASPECT	4:3 LETTERBOX
	STILL MODE	AUTO
	PROGRESSIVE	OFF
		ENTER
6	To complete the
	PROGRESSIVE
	setting
	ENTER
C AUDIO Setting

		Before proceeding…
4:3 LETTERBOX		1. Make sure your TV has progressive scan.
	SETUP	2. Connect with component video cable
		NOTE: If there is no picture or picture is
AUTO		distorted after selecting “YES”,
ON		wait about 15 seconds for auto recovery.
		A c t i va t e P r o gr e s s i ve ?
				NO
				YES
		SELECT: K / L	SET:ENTER

If there is no picture or you do not press any buttons for 15 seconds, Progressive Scan will switch to “OFF”.

Select “YES”.

Confirm again to use progressive scan.

If Picture is good, Select “YES”.

NO	or
YES

SELECT: K / L SET:ENTER

Select “YES”.

or

ENTER

picture in the still mode will

be highly defined.

• An individual picture on TV

screen is called as “frame”,

which consists of two sepa-

rate images called as “field”.

• Some pictures may be blurred

at the “AUTO” setting in the

still mode due to their data

characteristics.

PROGRESSIVE:

•You can set “PROGRESSIVE” to “OFF” either in the DISPLAY menu or by pressing and hold- ing [PLAY B] on the front of the unit for more than 5 seconds.

•When “PROGRESSIVE” is “ON”, video signals from VIDEO OUT and S-VIDEO OUT jacks will be distorted or not be output at all.

Functions

Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1) to 3) in the “CUSTOM Menu” section on page 20.

4 Select the desired item.
	or
AUDIO menu
SETUP	AUDIO
DRC		ON
DOWN SAMPLING		ON
DOLBY DIGITAL		BITSTREAM

5DRC (Dynamic Range Control):

(Default: ON)

Set to “ON” to compress the range between soft and loud sounds.

DRC	ON	OFF
	ON	ON
DOWN SAMPLING
DOLBY DIGITAL	BITSTREAM ENTER	BITSTREAM

DOWN SAMPLING: (Default: ON)

Set to “ON” when outputting in 48kHz.

Set to “OFF” when outputting the original sound.

DRC	ON	ON
DOWN SAMPLING	ON	OFF
DOLBY DIGITAL	BITSTREAM	BITSTREAM

ENTER

DOLBY DIGITAL: QUICK

(Default: BITSTREAM)

Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.

•BITSTREAM: Outputs a Dolby Digital Signals.

•PCM: Convert the Dolby Digital into PCM (2 channel).

DRC	ON	ON
DOWN SAMPLING	ON	ON
DOLBY DIGITAL	BITSTREAM	PCM

ENTER

6To exit the menu

SETUP

Hint

DRC:

•This function is available only on the discs which are recorded in the Dolby Digital format.

DOWN SAMPLING:

•When playing disc with copyright Protection, the sound will be down sam- pled at 48kHz, even if you set to “OFF”.

•This function is avail- able only on digital out- putting of a disc recorded in 96kHz.

DVD

– 21 – EN