Radio Shack TOUCHSCREEN REMOTE owner manual Learning Feature

Page 31

USERS GUIDE

THE LEARNING FEATURE

The remote comes with a complete library of pre- programmed codes. After you have set up the remote for your device, you may find that there are one or more keys that you had on the original remote control, which do not have a place on your remote’s keypad.

The remote includes a Learning Feature so you can add functions that are unique to your home entertainment devices (e.g.,VCR Tracking Up or Down). The custom keys (M1 – M4) have been provided for this feature. If you need to learn more than four functions per mode (max. approx- imately 25 functions), place the function on another key.

However, there are some considerations:

Your original remote controls must be in work- ing order for the Learning Feature to work properly.

Learned keys are mode specific, so each one can store a unique function for each mode.

Learned keys can be used in Macros (see Using Macros on page 34).

You can use any key for learning, except device keys, P, SCREEN and FAV SCAN.

Once you program a key, the original function will be overwritten.

For optimum learning, avoid high levels of ambient light such as natural sunlight or energy- efficient fluorescent lights.

NOTE: PLEASE HAVE YOUR ORIGINAL REMOTES AVAILABLE WHILE USING THE LEARNING FEATURE. BE SURE TO PRESS EACH KEY WITHIN 5 SEC- ONDS OF THE PREVIOUS ENTRY, OR THE REMOTE TIMES OUT, AND YOU MUST PRESS THE DESIRED KEY AGAIN.

EXAMPLE: TO COPY THE MONO/STEREOFUNCTION FROM YOUR ORIGINAL TV REMOTE CONTROL ONTO THE M4 KEY OF YOUR REMOTE.

1.Place the remote and your original remote con- trol on a flat surface. Make sure the ends that you normally point at your device are facing each other. Point the original remote to the front left side of the remote (see picture below). Keep the remotes at a distance of no more than 1 to 2 inches apart.

1 TO 2

INCHES

The Learning Feature 31

Image 31
Contents IN-ONE Table of Contents USER’S Guide Setup Codes for PvrsIntroduction To Install Batteries Battery NotesQuick Start Guide Device keys IR infrared IndicatorPower Kameleon panelLast Digit keys+100 VOL +VCR / DVD / SAT / CD / AUD transport keys SelectDirectional keys Left29. M1, M2, M3, M4 28. TV/VCR / A-BBeen entered Direct code set upProgramming a TV/VCR Combo Search Method Signal Make Sure Your TV is Switched to a Channel Other than Introducción Instalación DE Baterías Guía DE Inicio RápidoTeclas de aparatos Panel KameleonTeclas numéricas Keys Teclas direccionalesSUR SND / Sleep Configuración directa de código Método de Búsqueda 22 Guía DE Inicio Rápido Guía DE Inicio Rápido VCR DVD KEY TableUSER’S Guide VCR CBL/SAT DVD Audio Code VerificationTo unlock the volume control for a specific mode Volume LockTo cancel the volume lock across all modes Twice Favorite Channel ScanUsing Channel Scan Learning Feature Learning Feature To delete all learned functions within a certain mode Press TV, POWER,VCR, POWER, SAT Using MacrosTo erase the Macro from M4, press TV Code Reassigning Mode KeysResetting a Device KEY Upgrading Your Remote USER’S Guide Problem TroubleshootingSolution FCC Statement SpecificationsCare Bility of Such Damages Limited 90-DAY WarrantyCat. No 12/02 Fort Worth, Texas GPX JVCRCA ADCNAD JBLKLH LXIABC Códigos DE Configuración Para Convertidores DE CableMTC DKKTDK 0558, 0623 HTS GOICXC AOCMGA JCBKEC KTVNTC NECSSS TMK Setup Codes for TV/VCR CombosCCE Setup Codes for Vcrs Códigos DE Configuración ParaMEI HI-QSTS Sansui 0000, 0067, 0209 Setup Codes for Xbox USER’S Guide 05A03