Radio Shack TOUCHSCREEN REMOTE owner manual Using Macros, Press TV, POWER,VCR, POWER, SAT

Page 34

6-IN-ONE

USING MACROS

MACROS

You can program your remote to issue a sequence of commands at the press of one button. For example, you may want to turn off your TV,VCR, and Satellite at the same time. Any sequence of commands you regularly use can be reduced to one key press for your convenience. A key that is programmed with a Macro works through all modes (provided its available in that mode). Therefore a Macro should only be set on the Custom keys (M1 – M4). You can install a Macro on any key, except for the device keys (TV,VCR,

SAT/CBL, CD, AUD, and DVD), P, SCREEN, and

FAV SCAN.

TO SET UP THE MACRO MENTIONED ABOVE ON THE KEY LABELED M4ON YOUR REMOTE:

1.Hold down P for at least 3 seconds. The bottom of the IR Indicator blinks twice, and a circle appears around P.

2.Press 9 9 5. The bottom of the IR Indicator blinks twice.

3.Press M4. This is where your macro is assigned.

4.Press TV, POWER,VCR, POWER, SAT,

POWER.

5.To store the Macro, hold down P for at least 3 seconds. The bottom of the IR Indicator blinks twice.Whenever you press the M4 key, the remote will turn off your TV,VCR, and Satellite.

EACH MACRO CAN CONSIST OF A MAXIMUM OF 15 KEYSTROKES.

TO INCLUDE A FUNCTION FROM A PARTICULAR SCREEN IN A MODE, USE

SCREEN.

MAKE SURE THAT YOU PROGRAM A MACRO ON A SPARE KEY THAT YOU DONT USE IN ANY MODE.

MACROS PROGRAMMED ON SPECIFIC KEYS WORK REGARDLESS OF THE MODE (TV,VCR, SAT, CD, AUD, OR DVD). THE FUNCTION ORIGINAL-

LY PROGRAMMED ON THAT SPECIFIC KEY IS OVERWRITTEN WHEN YOU PROGRAM A MACRO.

TO AVOID ACCIDENTAL RECORDINGS WITH THE REMOTE, YOU MUST PRESS RECORD TWICE TO BEGIN RECORDING. IF YOU ASSIGN A MACRO ON RECORD, THE DOUBLE KEY PRESS IS DEACTIVATED. THEREFORE WE RECOMMEND NOT ASSIGNING A MACRO ON THIS KEY.

IF YOU HAD TO HOLD DOWN A KEY FOR A FEW SECONDS ON THE ORIGI- NAL REMOTE CONTROL TO GET A FUNCTION, THIS FUNCTION MAY NOT WORK IN A MACRO ON YOUR REMOTE.

34 Using Macros

Image 34
Contents IN-ONE Table of Contents Setup Codes for Pvrs USER’S GuideIntroduction To Install Batteries Battery NotesQuick Start Guide Kameleon panel IR infrared IndicatorPower Device keysVOL + Digit keys+100 LastLeft SelectDirectional keys VCR / DVD / SAT / CD / AUD transport keys28. TV/VCR / A-B 29. M1, M2, M3, M4Direct code set up Been enteredProgramming a TV/VCR Combo Search Method Signal Make Sure Your TV is Switched to a Channel Other than Introducción Guía DE Inicio Rápido Instalación DE BateríasPanel Kameleon Teclas de aparatosTeclas numéricas Teclas direccionales KeysSUR SND / Sleep Configuración directa de código Método de Búsqueda 22 Guía DE Inicio Rápido Guía DE Inicio Rápido KEY Table VCR DVDUSER’S Guide Code Verification VCR CBL/SAT DVD AudioVolume Lock To unlock the volume control for a specific modeTo cancel the volume lock across all modes Favorite Channel Scan TwiceUsing Channel Scan Learning Feature Learning Feature To delete all learned functions within a certain mode Using Macros Press TV, POWER,VCR, POWER, SATTo erase the Macro from M4, press Reassigning Mode Keys TV CodeResetting a Device KEY Upgrading Your Remote USER’S Guide Troubleshooting ProblemSolution Specifications FCC StatementCare Limited 90-DAY Warranty Bility of Such DamagesCat. No 12/02 Fort Worth, Texas ADC JVCRCA GPXLXI JBLKLH NADCódigos DE Configuración Para Convertidores DE Cable ABCMTC DKKTDK 0558, 0623 GOI HTSAOC CXCKTV JCBKEC MGANTC NECSSS Setup Codes for TV/VCR Combos TMKSetup Codes for Vcrs Códigos DE Configuración Para CCEHI-Q MEISTS Sansui 0000, 0067, 0209 Setup Codes for Xbox USER’S Guide 05A03