FE-CF-03SC | Transition Networks J/FE-CF-03 instruction

J/FE-CF-03

Stand-Alone media converter

• Fast Ethernet™

• Copper to Fiber

• 100Base-TX to 100Base-FX

Transition Networks J/FE-CF-03 Fast Ethernet™ media converter connects 100 Mb/s twisted-pair copper cable to a duplex 100 Mb/s fiber-optic cable.

Use the J/FE-CF-03 series media converter (or up to two media converters in series)

to extend over fiber, the distance between two 100BASE-TX devices (hub, switch, workstation, etc.).

Part Number	Port One - Copper	Port Two - Duplex Fiber-Optic

J/FE-CF-03	RJ-45, 100Base-TX	ST, 100Base-FX, 1300 nm multimode
	100 m (328 ft)*	2 km (1.2 miles)*

J/FE-CF-03(SC)	RJ-45, 100Base-TX	SC , 100Base-FX, 1300 nm multimode
	100 m (328 ft)*	2 km (1.2 miles)*

J/FE-CF-03(SM)	RJ-45, 100Base-TX	SC, 100Base-FX, 1300 nm singlemode
	100 m (328 ft)*	20 km (12.4 miles)*

J/FE-CF-03(LH)	RJ-45, 100Base-TX	SC, 100Base-FX, 1300 nm singlemode
	100 m (328 ft)*	40 km (24.9 miles)*


Single Fiber Optic (install as a pair)
Part Number	Port One - Copper	Port Two - Duplex Fiber-Optic

J/FE-CF-03-100	RJ-45, 100Base-TX	SC, 1310 mn TX/1550 nm RX, 20 km
	100 m (328 ft)*	(12.4 miles)*

J/FE-CF-03-101	RJ-45, 100Base-TX	SC, 1550 mn TX/1310 nm RX, 20 km
	100 m (328 ft)*	(12.4 miles)*

Note: Install the J/FE-CF-03-100 and the J/FE-CF-03-101 in the same network as local and remote peers.

*Typical maximum cable distance. Actual distance is dependent upon the physical characteristics of the network installation.

Installation . . . . . . . . . . . . . . . . . . . . .2

Operation . . . . . . . . . . . . . . . . . . . . . .5

Cable Specifications . . . . . . . . . . . . .6

Technical Specifications . . . . . . . . . .7

Troubleshooting . . . . . . . . . . . . . . . .8

Compliance Information . . . . . . . . .11