CONNECTIONS
CONNECT THE POWER CORD
•Connect the AC power cord into a wall outlet.
•Press the STANDBY/ON button on the top of unit or remote control to turn on the unit.
Note:
•Be sure the AC power cord is disconnected and all functions are off before making connections.
•Make sure that all the components are connected correctly.
•To prevent electrical shock, match wide blade of plug to wide slot, and fully insert.
•When you are not going to use the unit for a long period of time, disconnect the power cord.
To AC outlet
INSTALLATION
REMOVINGTHE BASE STAND
WARNING: The LCD Display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp, or anything that could scratch or damage the LCD display, come in contact with it. Do NOT place pressure on the rear of the unit at any time because the screen could crack.
1.Disconnect any cables or cords connected to the unit.
2.Lay the unit down on a flat surface, so the back side is facing up, making sure to place a soft cushioned material (such as a pillow or thick piece of foam) beneath the screen.
3.Remove the four screws and then remove the BASE STAND from the TV.
13
13 | 18/01/2007, 17:01 |