TV SETUP
TV SETTING
1.Press the MENU button.
2.Use the 
or 
button to select the TV setting menu, then press the 
button to confirm the setting.
3.Use the 
or 
button to select the Channel no. setting and use the 
or 
button to change the channel no.
4.Use the 
or 
button to select the Tuning mode and use the 
or 
button to change from AIR
5.Use the 
or 
button to select the Auto tune and press the 
or 
button to confirm the selection. The unit will immediately search through all possible TV channels and store those channels with signals in memory. After this is complete, the unit will switch to the first channel found.
6.To exit the MAIN MENU and return to the normal screen, press the EXIT button.
Note : This option is available in TV mode only.
Remarks: |
|
|
| TV MODE | ||||
Channel no. : |
| |||||||
|
|
|
|
|
| |||
|
|
|
|
|
| |||
|
| mode. |
|
|
|
|
|
|
Tuning mode : | Air or Cable mode are available. |
|
|
|
|
|
| |
|
|
|
|
|
| |||
Auto tune | : | Searches for usable stations and stores them in |
|
|
|
|
|
|
|
| memory. |
|
|
|
|
|
|
Skip | : | ON - Skip weak channels. OFF - No channel skip. |
|
|
|
|
|
|
|
|
|
|
|
| |||
Fine tune | : | The frequency changes to allow fine tuning. |
|
|
|
|
|
|
AFC | : | Auto frequency control. |
|
|
|
|
|
|
MTS | : | Select the Mono sound/Stereo sound/Secondary |
|
|
|
|
|
|
|
| Audio Program (SAP). Refer to the section titled | ||||||
|
| “MTS SETTING” for instructions. | ||||||
MTS (Multi-channel Television Sound) SETTING
This feature allows reception of sound other than the main audio for the program.
1.Press the MENU button.
2.Use the 
or 
button to select the TV setting menu, then press the 
button to confirm the setting.
3.Use the 
or 
button to select MTS menu, and press the 
or 
button to select the options
(Mono, Stereo, SAP)
4.To exit the MAIN MENU and return to the normal screen, press the EXIT button on remote control.
TV MODE
Note:
• MTS only operates while in TV mode.
• The SAP (Secondary Audio Programs) feature allows a TV station to broadcast other information, which could be audio in another language.
RESTORE SETTING
If you reset the TV to the factory settings, all your present settings on picture & sound will be erased and replaced by the factory’s default settings. However, picture setting in PC mode and parental setting will not be erased.
19
19 | 18/01/2007, 17:03 |