StarTech.com S352BMU3N manual Firmware upgrade will install

Page 51

WARNING! It is not recommended that a firmware upgrade be attempted unless specifically stated on the StarTech.com website, or directed by a StarTech.com Technical advisor.

WARNING! It is recommended that all drive DATA be backed up

prior to attempting a firmware upgrade. Lost drive data is not the responsibility of StarTech.com

To upgrade firmware, visit the StarTech.com website, if a new firmware upgrade is available and recommended, download and save the file to a location you can easily access.

Access the Enclosure web GUI and select System Manage – Firmware from the main menu

Click the browse button, a file explorer window will appear, locate and select the firmware download in the location it was saved, and click the Open button.

The firmware upgrade will install.

WARNING! During the firmware upgrade do not turn off the enclosure, close the browser, or navigate away from the firmware update page. If the upgrade is interrupted then it could result in damage to the enclosure or data on the drives. Once the upgrade has completed the enclosure will automatically reboot.

Note: Update may take several minutes. The below progress indicator will appear providing a countdown to system reboot.

Instruction Manual

47

Image 51

Contents Dual 3.5 Sata NAS Enclosure with RAID and USB FCC Compliance Statement Table of Contents Technical Support Warranty Information Front View Rear View Product DiagramPackaging Contents Installing your hard drivesRecommended System Requirements Page Lift the panel off to reveal the drive bays Slide each of your hard drives into the bay Page RAID Notes Set your RAID ConfigurationAvailable RAID Configurations NAS SetupInitialize Your Hard Drives Access Web InterfaceHard Drive Initialization Use your NAS Basic NAS OperationMap the NAS as a Network Drive in Windows 8.1/8/7/Vista Page Create User Accounts Page Page Set a Static IP Address Page Manage NAS Files and View Media Through a Web Browser Access files and folders on your NAS through a web browserUpload files to your NAS Page Page Page Connecting Your Enclosure for DAS Operation Over USB Mobile App AccessAdvanced NAS Operation Access ConfigurationView or change Host/Group Name View or change Date/Time and settings View or change Administration Account User name and PasswordIf you have selected Automatic View or change GUI display LanguageView Internal IP View MAC AddressView Network Information View PPPoE IP Address or Connect to PPPoE Internet Service Enable or disable Service InformationMedia Service SMB ServiceWebDAV Service FTP ServiceView the current Disk Status View or Change IP Setting If you have selected Automatic IP Configure PPPoE Network Page Enable and Configure Ddns Page Enable and Configure Network Service Ports Port mapping and URL Display UPnP Port Mapping Universal plug and playManage your Hard Drive Configuration Sleep Time idle A.R.T SATA0/SATA1 Manage your RAID Configuration Drop down menu shows the current RAID configuration RAID ModeRAID Status Update your NAS Enclosure Firmware Update Firmware upgrade will install Reboot Your NAS Enclosure remotely using the Web Interface Shutdown your NAS Enclosure remotely using the Web Interface Page Restore Default settings to your NAS Enclosure Reset Default settings will now be restored Enable or Disable SMB Service Enable or Disable WebDAV Service WebDAV file management apps Enable or Disable FTP Service Download and host Torrent Files Page Delete Activate DownloadPause Download Stop DownloadMax Peers Per Torrent SettingsUpload Limits Download LimitMail Notification Assign Folder for Upnp AV/DNLA Service and iTunes Playlists Page Manage Accounts Create an Account Disable an Account Change Account SettingsDelete an Account Enable an accountLimit/Grant Account File Access Grant Folder AccessLimit Folder Access Account Folder Management Create a New FolderRename Folder Delete a Folder Quick Setup Guide Optional Limitation of Liability Technical Support Warranty Information