Texas Instruments 8200IW, 8200IC manual General Maintenance, Lamp Usage, Onscreen Lamp Messages

Page 33

3M™ Digital WallDisplay

Maintenance

General Maintenance

For general cleaning of the screen and exterior of the 3M Digital WallDisplay, use a damp cloth or dry clean- ing cloth such as the 3M High Performance Cleaning Cloth.

Standard dry-erase cleaners may be used on the dry-eraseable screens, such as Sanford® Expo® Whiteboard Cleaner. Do not use other spray cleaners or solvents on any part of the 3M Digital WallDisplay.

Lamp Usage

Use and Replacement of Lamp

The 3M Digital WallDisplay lamp has a normal operating time of approximately 1600 hours, called the lamp life. After the lamp has been operating for 1400 hours or longer, the following messages will appear on the screen for the first three minutes of operation. When this happens, turn off the 3M Digital WallDisplay and replace the lamp with a new one. Using an old lamp in the 3M Digital WallDisplay could cause a malfunction.

Onscreen Lamp Messages

PLEASE CHANGE THE LAMP

The lamp has been in use for 1400 hours and needs to be changed. After replacing the lamp, reset the lamp timer.

THERE ARE (x) HOURS OF LAMP LIFE REMAINING

THE WALLDISPLAY WILL SHUT OFF IN 40 MINUTES

The lamp has been in use for 1500-1579 hours, and the power will turn off after 40 more minutes. After replac- ing the lamp, reset the lamp timer.

THERE ARE (x) HOURS OF LAMP LIFE REMAINING

THE WALLDISPLAY WILL SHUT OFF IN 5 MINUTES

The lamp has been in use for more than 1580 hours, and the power will automatically turn off after 5 minutes. After replacing the lamp, reset the lamp timer.

All of these messages will display for no longer than three minutes, but each will display whenever you turn the lamp on again, until the lamp is replaced.

For lamp-changing instructions, please refer to the next page.

© 3 M 2003. All Rights Reserved.

33

Image 33

Contents Operator’s Guide This page intentionally left blank for printed version Contents Service Information Contents 3M Digital WallDisplayAppendix Introduction Safety PrecautionsThank You for Choosing 3M Intended UseIntroduction 3M Digital WallDisplay Introduction Product Safety LabelPatents TrademarksSoftware and Copyright License Agreement 3M Digital WallDisplay Technical SupportFCC Statement-Class a Video Signal CablesEEC Statement-Class a Instructions to UsersIdentify Model Model Identification and DifferencesModel Differences Model Number Model NameOptional Accessories Part Identification 3M Digital Wall Display Features Connecting to Various Equipment System SetupStartup OperationOperation 3M Digital WallDisplay ShutdownFeatures Remote Control UnitForward Keypad Rear Keypad Installing or Replacing Batteries Assembling Digital Markers Digital Markers and EraserDigital Markers and Eraser 3M Digital WallDisplay Assembling Digital EraserMenu Navigation Menu SystemColorful-Bright Slider Menu KeypadWarm-Cool Slider Volume SliderMute Menu Function Reset All Menu Input Select MenuMenu System 3M Digital WallDisplay Image Adj Sub-Menu Tools Sub-Menu Whiteboard Mode 8200IC only Copyboard ModeProjection Mode 8200IC only Using Copyboard Mode Installing eBeam Software on Your Computer Using Whiteboard Mode Minimum Requirements Apple MacintoshWallDisplay as a Copyboard or Digital Whiteboard Installing the SoftwareUsing Projection Mode General Maintenance MaintenanceLamp Usage Onscreen Lamp MessagesMaintenance 3M Digital WallDisplay Lamp ReplacementMaintenance 3M Digital WallDisplay dealer replace a ruptured lamp Dispose of this lamp properlyResetting Lamp Hours Replacing ProjectionScreen Common Problems and Solutions TroubleshootingMessage Meaning Onscreen MessagesEBeam Hardware Detection/Use EBeam SoftwareSee Proxy Server Setup Problem EBeam Try the followingServer. See Proxy Server Setup MeetingWriting Data/Capture Dialog box see Setting Pen Colors/Line Thickness. ItChoose eBeam Hardware Detect eBeam Hardware EBeam HardwareTroubleshooting Microsoft Internet Explorer EFI Meeting AppletNetscape Clear Memory Cache and Clear Disk CacheSee Loading an Excel Spreadsheet as a Background Image Background ImagesParts and Accessories Service InformationOptional Accessories Ordering Parts or Getting InformationAppendix 3M Digital WallDisplay SpecificationsInput/Output Signal Specifications Resolution Refresh Rate Horizontal FrequencyComputer Compatibility Printer Compatibility AppendixSection Head Important Notice