VXI CT-400 Option 100 Adjustable Rack Mount Flanges with Handles, Required Tools, Parts List

VXI Technology, Inc.

OPTION 100 - ADJUSTABLE RACK MOUNT FLANGES WITH HANDLES

This procedure provides the necessary instructions for installing the adjustable rack mount flanges with handles.

Required Tools

1)#2 Phillips Screwdriver

2)T15 Torx® screwdriver

Parts List

Assembly Procedure

1)Lay the mainframe on a protected work surface on its long side with the voltage monitor LEDs of the mainframe facing front with the power switch toward the top.

2)Locate the right and left side rack mount brackets. Install the rack mount brackets using twelve 8-32 x 5/8" button head Torx screws. Refer to Figure 2-3for guidance. Depending on how the rack mount brackets are installed, the mainframe can be recessed up to 10" or can be extended from the rack up to 5".

3)Locate the handles for the rack mount brackets. Use the 8-32 x 3/8" flat head Phillips screws to install these handles as shown in Figure 2-3.