Compliance Information

CISPR22/EN55022 Class A

CE Mark

FCC Regulations

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at the user's own expense.

Canadian Regulations

This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set out on the radio interference regulations of the Canadian Department of Communications. Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la Class A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.

European Regulations

Warning This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Achtung! Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb dieses Gerätes Rundfunkstörungen auftreten. In diesem Fäll ist der Benutzer für Gegenmaßnahmen verantwortlich.

Attention! Ceci est un produit de Classe A. Dans un environment domestique, ce produit risque de créer des interférences radioélectriques, il appartiendra alors à l'utilsateur de prende les measures spécifiques appropriées.

CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in damage to the public telephone network.

Der Anschluss dieses Gerätes an ein öffentlickes Telekommunikationsnetz in den EG- Mitgliedstaaten verstösst gegen die jeweligen einzelstaatlichen Gesetze zur Anwendung der Richtlinie 91/263/EWG zur Angleichung der Rechtsvorschriften der Mitgliedstaaten über Telekommunikationsendeinrichtungen einschliesslich der gegenseitigen Anerkennung ihrer Konformität.

Trademark Notice

All registered trademarks and trademarks are the property of their respective owners.

Copyright Restrictions

© 2001, 2004-2005 Transition Networks. All rights reserved. No part of this work may be reproduced or used in any form or by any means - graphic, electronic, or mechanical - without written permission from Transition Networks.

Printed in the U.S.A.	33231.D

J/E-CX-TBT-01 specifications

The Transition Networks J/E-CX-TBT-01 is a robust media converter designed to facilitate seamless communication between different network environments. This versatile device serves as an essential solution for enterprises and organizations seeking to integrate older copper-based Ethernet segments with modern fiber optic infrastructure.

One of the standout features of the J/E-CX-TBT-01 is its ability to convert 10/100/1000BASE-T Ethernet signals over twisted pair cabling into fiber optic signals, thereby enhancing network performance and extending transmission distances. With this converter, users can extend their networks beyond the typical distance limitations of copper cabling, which is usually restricted to about 100 meters. This capability allows organizations to reach remote locations or connect various buildings on a campus efficiently.

The J/E-CX-TBT-01 supports a variety of networking standards, making it a truly versatile tool for network administrators. It is designed to comply with IEEE 802.3 standards, ensuring compatibility with a wide range of network devices. The media converter is equipped with both RJ-45 ports for copper connections and SFP slots for different fiber optic transceivers, providing flexibility based on the type of network architecture in place.

Technologically, the J/E-CX-TBT-01 is engineered to be easily integrated into existing networking frameworks without requiring complex configuration or additional software. Its compact design allows for convenient installation in various settings, including data centers, remote offices, and industrial sites. The device also features LED indicators, which provide essential information regarding power status, link/activity, and data transmission status, making troubleshooting and monitoring straightforward for IT personnel.

Additionally, the J/E-CX-TBT-01 incorporates advanced features such as auto-Negotiation, enabling it to automatically select the optimal data rate and duplex mode. The reduced power consumption of the unit contributes to lower operational costs, making it an environmentally friendly choice.

In conclusion, the Transition Networks J/E-CX-TBT-01 is designed for organizations that require reliable and efficient connectivity solutions across different media types. Its myriad of features, ease of use, and compatibility with industry standards make it an invaluable asset for enhancing network performance and reach.