Quatech SSU2-400I operation manual Product Specification

Page 6

3

Product Specification

Serial Port

RS-232

No. of Ports : RS-232 * 1 Port

Port Type : DB9 male

RS-232 Signals : DCD , RX , TX , GND , RTS , CTS , DTR , DSR

Receive buffer : 576 Byte

Transmit buffer : 640 Byte

Baud Rate Speed : 300 bps￿921.6k bps

Parity :None , Odd , Even , Space , Mark

Data Bit : 5 , 6 , 7 , 8

Stop Bit: Auto-Detection : 1 , 1.5 , 2,

Flow Control : X-On / X-Off or Hardware

Optical isolation protection : 3000V DC

Connected Serial port type identification : Auto-Detection

15KV ESD for all signal

5

Image 6
Contents USB to RS-232/422/485 Isolated Converter First Edition, Jun Table of Contents Introduction Package checklist Product Specification USB Port EMC FCC Class A, CE Class a Warranty 1 Year USB Type B Connector Product Panel Views DescriptionTerminator DIP Switches Serial I/O PortSerial I/O Port of RS-232/422/485 LED Indicators SYS Red RX OrangeTX Green Driver Installation Install CP210xVCPWin2KXPS2K3 softwareChoose Next Icon Choose Accept item of license agreement Execute the program installation Choose destination locationScan and install CP210x USB to Uart Bridge Driver Installer System Settings Change Notice InstallShield Wizard CompleteHardware Installation & Setup Hardware InstallationPage Hardware Setup Into Manage icon in My ComputerChoose Device Manager and click PortsCOM & LPT Detail parameters of CP210x USB to Uart Bridge ControllerDevice status of CP210x USB to Uart Bridge Controller Driver detail informationDetails item Pin outs and Connector Appendix aRS-422 Pin Assignment