Eiki 8080 owner manual Usb

Page 30

Appendix

 

Symptoms

Causes

Actions

See page:

 

 

 

 

 

 

 

• The cassette tape is still playing.

• The tape recorder section has the

13

 

 

 

higher priority for playback. Stop the

 

 

Playback does not start.

 

tape playback, then play the files on

 

 

 

the USB flash drive.

 

 

 

 

 

 

 

• There is no file to play back on the

• Connect a USB flash drive that con-

24

 

 

USB flash drive.

tains supported MP3 or WMA files.

 

 

 

 

 

 

 

“NO USB” appears on the

• The unit does not recognize the

• Remove the USB flash drive, then

 

 

USB flash drive.

connect it again.

 

 

display even when a USB

 

 

• The unit does not support the USB

• Use a different USB flash drive.

24

 

flash drive is connected.

 

flash drive.

 

 

 

 

 

 

 

 

 

 

 

 

 

• WMA files that are protected by

• Play WMA files that are not pro-

24

 

 

copyright cannot be played.

tected by copyright.

 

 

 

• The unit does not support WAV for-

• Play files that use the MP3 or WMA

24

 

Some files cannot be

mat.

format.

 

 

played.

• The MP3 or WMA files are in an

• Play only files that use the sup-

24

section

 

unsupported format.

ported format.

 

 

• The root level or the folder contains

• The unit recognizes up to 99 files at

25

 

 

 

 

100 or more MP3/WMA files.

the root level or in each folder.

 

recorder

 

 

 

 

Playback skipping or

• The MP3 or WMA files are in an

• Play only files that use the sup-

24

 

 

noise

unsupported format.

ported format.

 

 

 

 

 

 

 

USB

Playback sequence does

• The unit is in Repeat, Random, or

• Cancel Repeat, Random, or Pro-

 

not correspond to track

Program Play mode.

gram Play mode.

14, 15

 

 

order.

 

 

 

 

 

 

 

 

 

Playback sequence does

• You have edited the file or folder on

• Tracks are played in the order of

 

 

not correspond to the

the computer.

entry, not in the order in which they

24

 

recording order.

 

were recorded.

 

 

 

 

 

 

 

Tracks cannot be recorded

• You attempted to record tracks from

• Only music CDs are supported for

 

 

from CD to USB flash

an MP3 or WMA disc.

recording to a USB flash drive.

17, 18

 

drive.

 

 

 

 

 

 

 

 

 

 

• The free space on the flash drive is

• Due to the limitations of the system,

 

 

 

less than 256KB.

recording is unavailable if the free

 

 

 

 

space on the drive is less than

 

 

Tracks cannot be

 

256KB.

 

recorded.

• The root level contains a folder

• Due to the limitations of the system,

 

 

 

 

named “CD9999” or “TP9999.”

recording is unavailable if the root

 

 

 

 

level contains a folder with a name

 

 

 

 

that includes number 9999.

 

 

 

 

 

 

 

The cassette tape cannot

• The orientation of the cassette tape

• Insert the tape so that the exposed

 

 

is wrong.

tape is facing toward the front of the

16

 

be inserted.

 

 

unit.

 

 

 

 

 

 

 

 

 

 

 

Low sound quality or

• The record/playback head is dirty.

• Clean the head.

28

 

noise

 

 

 

 

 

 

 

 

 

 

 

 

 

• The tape has too much slack.

• Remove the tape slack, then insert

27

 

 

 

the tape.

 

section

 

• You did not press the [STOP/

• Before switching the transport con-

16

 

EJECT] button before pressing

trol, press the [STOP/EJECT] but-

 

 

 

 

 

Tape is damaged or tan-

another transport control button.

ton.

 

recorder

 

(e.g.,) [REWIND] [STOP]

 

gled.

 

 

 

[PLAY]

 

 

 

 

 

 

 

 

 

 

• You are using a long tape that

• A long tape is thin and may easily

27

Tape

 

exceeds 90 minutes.

become tangled with the capstans

 

 

 

and rollers. Use a 90 minutes or

 

 

 

 

 

 

 

 

shorter tape.

 

 

 

 

 

 

 

 

• The erase prevention tab on the

• Check to see if the tab is broken. If

 

 

The [REC] button cannot

tape has been removed.

you want to overwrite the tape,

27

 

be depressed.

 

cover the erasure prevention hole

 

 

 

 

 

 

with a piece of cellophane tape.

 

 

 

 

 

 

 

The previous recording is

• The erase head is dirty.

• Clean the erase head.

28

 

• You are using a TYPE II (high-posi-

• Use a TYPE I (normal) tape.

27

 

not deleted completely.

 

tion) or TYPE IV (metal) tape.

 

 

 

 

 

 

 

 

 

 

 

30

Image 30
Contents USB Recorder CD Player Cassette Tape Recorder Important Safety Instructions Precautions PowerSupplied Accessory Modèle pour les CanadienContents Features Up to five headphone jacks can be used simultaneouslyOrientation Controls and ConnectionsCD/USB transport section Display AC indicator lights up Turning the Power OnTurning the Power Off AC indicator turns offAdjusting the volume Adjusting the toneAdjusting the left and right level balance Basic Operation and Connection5Connecting a microphone 6Connecting an external device Listening through the headphonesConnecting external speakers Stopping playback Pausing playbackChanging the display indication Resume functionFast forward/fast rewind Searching Selecting a folderRandom Playback Playback Pitch ControlRepeat Playback Program PlaybackChecking, deleting and adding programmed tracks Stopping the tape playback Pausing the tape playbackListening to a Tape Rewinding or fast forwarding the tapeConnect the USB flash drive to the USB port Set the Input Select switch to CD 2Insert a music CDRecording to a USB Flash Drive Press the USB REC buttonStopping recording Set the Input Select switch to CD Insert a music CDPress the USB REC button twice within one Second Start recording from the desired trackPress the Play button in the tape transport section Set the Input Select switch to USB Insert a cassette tapeButton blinks red, and the unit enters record ready mode Connect the USB flash drive to the USB portRecording from a CD to a Cassette Tape Set the Input Select switch to CD Insert a CDRecording to a Cassette Tape Use a Type I Normal cassette tape for recordingSet the Input Select switch to USB Connect a USB flash drive Recording from a USB Flash Drive to a Cassette TapeUsing a Microphone or External Device Mic Mixing RecordingUsing an External Device About CD-R and CD-RW discs Supported Discs, USB Devices, and FilesSupported USB Devices 8080 supports the following file formatsAbout Folders and Files File Playback SequenceCD USB flash drive About CD and Cassette Tape Handling CDsRecommended cassette tapes Other precautions for handling cassette tapesHandling Cassette Tapes Loose tapeCleaning the optical pickup lens of the CD player MaintenanceCleaning the unit Cleaning the head of the cassette tape recorderTroubleshooting Not light upUSB USB recorder section SpecificationsCD player section Cassette tape recorder sectionSN 29344778A

8080 specifications

The Eiki 8080 is a remarkable projector that has garnered attention for its blend of advanced technology and user-friendly features. Designed primarily for professional and educational environments, it offers a robust solution for presentations, film screenings, and various multimedia applications.

One of the standout features of the Eiki 8080 is its impressive brightness, which typically measures around 3500 lumens. This high luminosity ensures vivid and clear projections even in well-lit rooms, making it a versatile choice for diverse settings. The projector employs state-of-the-art DLP (Digital Light Processing) technology, allowing for superior image quality with sharp details and vibrant colors. This technology also contributes to reduced maintenance requirements and increased lifespan.

In terms of resolution, the Eiki 8080 boasts native XGA (1024x768) resolution, which is ideal for a wide range of content—from detailed slideshows to high-definition videos. The projector supports various aspect ratios, providing flexibility depending on the source material and screen configuration. Additionally, its ability to handle multiple input formats, including HDMI, VGA, and composite video, allows seamless connectivity with different devices such as laptops, Blu-ray players, and cameras.

Portability is another key characteristic of the Eiki 8080. Its relatively lightweight design coupled with an integrated carrying handle makes it easy to transport, making it suitable for traveling professionals or educational setups that require mobility. The projector also features built-in speakers, providing satisfactory audio output for smaller gatherings, although external speakers can be connected for larger audiences.

A user-friendly interface enhances the experience, with straightforward controls that enable quick adjustments to settings such as focus, zoom, and keystone correction. This level of customization allows users to achieve the perfect image alignment and quality, ensuring effective communication during presentations.

Additionally, the Eiki 8080 emphasizes eco-friendliness with energy-saving features, prolonging lamp life and reducing power consumption, which is a crucial consideration for institutions conscious of operational costs and environmental impact. Overall, the Eiki 8080 amalgamates advanced technology, portability, and user-centric design, making it a preferred choice for professionals in various fields.