Winegard 1000 manual

Page 8

3Place another two sheets of void fill in the cardboard box, and place the LNB on top of these sheets of void fill.

5Place two sheets of void fill in the cardboard box, and push these two sheets into the box so that they cover the LNB.

4Position the LNB in the center of the box. Make sure the cables are still connected to the LNB.

6Place an additional two sheets of void fill in the cardboard box so that they form an ‘X’; close the box, and tape it closed.

7Return the package to 3111 Kirkwood St., Burlington, IA 52601. If a label has not been provided, use Winegard’s UPS shipping account, 530400, to return the package to Winegard Company.

Winegard Company • 3000 Kirkwood Street • Burlington, IA 52601

1-800-288-8094 • Fax 319-754-0787 • www.winegard.com • Printed in U.S.A.

©2008 Winegard Company Rev5 1/14 2452138

Winegard and TRAV’LER are registered trademarks of Winegard Company.

DISH is a registered trademark of DISH Network L.L.C.

Image 8
Contents Replacement Dish LNB Assembly Raising the Antenna Unplug the TRAV’LER interface, and removeTurret Removing the Reflector and LNB AssemblyReflector nut not shown Installing the Dish Reflector and LNB Assembly Reflector bracket Skew housingStiffener Plate BoltsTIP CapSetting the IDU for Dish Re-packaging the Removed LNB for RP-SK21 Users Re-packaging the Removed LNB for OE-DISH Users